Hot Items In This Category

Bolton Tools 12in x 30in Gear-Head Metal Lathe With Stand & Coolant System Stand Included! CQ9332A
Zoom

Bolton Tools 12in x 30in Gear-Head Metal Lathe With Stand & Coolant System Stand Included! CQ9332A

TPIN: YN00Y84AA Condition: New

Availability: Out of stock

Price as configured: $2,875.60 $2,875.60

  FREE SHIPPING
Notify me when this product is in stock Notify me

This gear head metal lathe with stand and coolant system is a bargain!  The CQ9332A is the biggest, feature rich lathe we offer and a very attractive price.  

This 12" x 30" Metal Lathe has been a staple in Bolton Tools lathe line up for years.

The hardened and ground bed ways, gear drive spindle, combined with included coolant system, and power feed on X and Y, make this an absolute steal!  

The 1.5" spindle bore is a very big selling point.  No more being restricted with the 1" bore that other machines have.  Add a tail stock drill chuck, live center, and some cutting bits and you are ready to rock with Bolton Tools CQ9332A.

Stand Included! (assembly required)

Other Models Like This Product
Bolton Tools 16 in x 40 in Professional Gunsmith Lathe Stand Included! | BT1640-1
Bolton Tools 16 in x 40 in Professional Gunsmith Lathe Stand Included| BT1640-1
$7,324.72
+ FREE SHIPPING

Out of stock

Bolton Tools 16 in x 40 in Professional Gunsmith Lathe Stand Included! | BT1640-3
Bolton Tools 16 in x 40 in Professional Gunsmith Lathe Stand Included! | BT1640-3
$7,324.72
+ FREE SHIPPING

Out of stock

Bolton Tools 14" x 40" Precision Tool Room Metal Lathe | BT1440-1
Bolton Tools 14" x 40" Precision Tool Room Metal Lathe | BT1440-1
$6,034.11
+ FREE SHIPPING

Out of stock

Bolton Tools 14" x 40" Precision Tool Room Metal Lathe | BT1440-3
Bolton Tools 14" x 40" Precision Tool Room Metal Lathe 3Phase | BT1440-3
$6,314.48
+ FREE SHIPPING

Out of stock

14" x 40" Gear Head Toolroom Metal Lathe with 2" Bore Single-Phase | BT1440G-1
Bolton Tools 14" x 40" Gear Head Toolroom Metal Lathe with 2" Bore Single-Phase | BT1440G-1
$6,013.45
+ FREE SHIPPING

Out of stock

Bolton Tools 14in x 40in Gear Head Toolroom Metal Lathe With 2" Bore Three-Phase BT1440G-3
Bolton Tools 14in x 40in Gear Head Toolroom Metal Lathe With 2" Bore Three-Phase BT1440G-3
$6,013.45
+ FREE SHIPPING

Out of stock

Bolton Tools 13" x 37" Gear-Head, Gap Bed Lathe With Stand BT1337G
Bolton Tools 13" x 37" Gear-Head, Gap Bed Lathe With Stand BT1337G
5 Review(s)
$4,021.61
+ FREE SHIPPING

Out of stock

BL330E Metal Lathe a
13 X 24 IN Metal Lathe BL330E Gear Head Lathe with Stand
1 Review(s)
$2,273.40
+ FREE SHIPPING

Out of stock

Bolton Tools 14" x 40" Metal Lathe BT1440GQT-3 a
Bolton Tools 14" x 40" Gear Head Toolroom Metal Lathe BT1440GQT-3 with 2" Bore
$6,020.61
+ FREE SHIPPING

Out of stock

14" x 40" Gear Head Metal Lathe BT1440GQTD-3 with 2" Bore & DRO
Bolton Tools 14" x 40" Gear Head Metal Lathe BT1440GQTD-3 with 2" Bore & DRO
$7,199.00

Out of stock

16in x 40in Gunsmith Lathe with DRO and Quick Change Tool Post
Bolton Tools 16in x 40in Gunsmith Lathe with DRO and Quick Change Tool Post
$7,324.72
+ FREE SHIPPING

Out of stock

BL330E-1-N Lathe c
13 x 30 IN Metal Lathe Gear Head Lathe with Stand and Drawer
4 Review(s)
$2,922.40
+ FREE SHIPPING

Out of stock

13 x 30 IN Metal Lathe Gear Head Lathe with Stand and Drawer
13 x 30 IN Metal Lathe Gear Head Lathe with Stand and Drawer
$3,423.40
+ FREE SHIPPING

Out of stock

16in x 40in Gunsmith Lathe with DRO and Quick Change Tool Post - 3Ph
Bolton Tools 16in x 40in Gunsmith Lathe with DRO and Quick Change Tool Post - 3Ph
$7,324.72
+ FREE SHIPPING

Out of stock

Product Description

SPECIFICATION

  • Swing over bed 320mm 12-3/5"
  • Swing over carriage 200mm 7-7/8"
  • Distance between centers 750mm 30"
  • Lathe Chuck Diameter 160mm 6"
  • Lathe Chuck Type 3 Jaw Self Centering
  • Spindle taper MT5#
  • Spindle through bore 38mm 1-1/2"
  • Spindle Speeds 12(75-1900 RPM)
  • Metric threads 21 (0.45-6mm)
  • Inch threads 28 (5-48 1/n")
  • Longitudinal feed rates 0.1-1.50mm/r 0.004-0.059 in.per revolution
  • Cross feed rates 0.022-0.3mm/r 0.0008-0.0118 in.per revolution
  • Tailstock barrel Taper MT#3
  • Tailstock barrel travel 80mm 3-1/7"
  • Electrical Specifications :
  • Horsepower 1100w 1-1/2hp
  • Motor Type A/C
  • Phase Single
  • 220 volt / 11o volt
  • Shipping weight:836 lb

PRODUCT DIMENSIONS & WEIGHT:

 

  • Approximate Net Weight: 710 lbs
  • Overall Dimentions: 62" Wide x 32" Deep x 57" Tall
  • Footprint: 24-3/5" Deep x 45-1/4" Wide
Product Information
Technical Details
Additional Information
3.7
6 Reviews, 5 Q&As
Ask A Question
Reviews

Customer Reviews

6 Item(s)

per page
Chuck Verified Buyer
Rating
1/23/2022
Great variety
Found some hard to find metal outdoor cabinets and received them quickly and very reasonably priced. Great company
Jim B. Verified Buyer
Rating
9/10/2020
The stand not adequate for
The stand not adequate for size of lathe. Very narrow and rocks easily. The front panel on the stand was approx. 2 inches too wide and would not fit. Had to be cut down and re-drilled. Very sharp edges on the sheet metal.
Some screws and pins loose or had
mike Verified Buyer
Rating
6/27/2019
CQ9332A parts
I bought min used its a ok lathe but the parts are hard to find and some of the gears were out fast if you use it much the feed is the most delicate
Darwin M. Verified Buyer
Rating
3/26/2019
Bolton lathe
Just the right size for my shop. Pretty good quality for its price range.
John B. Verified Buyer
Rating
3/24/2019
Great equipment, Embarrassingly Poor owner’s Guide
The lathe arrived in very flimsy crating that basically disintegrated on arrival. The lathe was intact, fortunately. A modest investment in high-quality Chinese-to-English for the operator’s manual would certainly inspire greater confidence in the overall
James P. Verified Buyer
Rating
2/28/2019
Cq9332A metal lathe
Company shipped purchase fast and arrived in excellent condition. Product is average at best and OK for the occasional home shop use.

6 Item(s)

per page
Question
Q: When will this lathe be back in stock. Thank you, Thomas Travis
Answers(1)
8/5/2018
A: The CQ9332A will be back in stock around the end of August or beginning of September
8/7/2018
Q: this not onsale same price as bolton sells for
Answers(1)
3/24/2020
A: What are you talking about. I ordered theCQ9332A lathe two weeks ago and as of March 23 I was told It hadnt even been shipped yet. I paid for It with my Mastercard, and DI expect to recieve It for the same price we agreed on two weeks ago. I do not unders
3/24/2020
Q: Do you have any other pictures of this lathe? All I see are the voltage between 220 and 110, what's the performance different between the two? Very interested, but can't seem to find much about it, or any videos besides one from a long time ago.
Answers(1)
2/27/2021
A: Yep I seen the same thing
3/3/2021
Q: What is the weight of the Bolton CQ9332a lathe?
Answers(1)
4/22/2021
A: It was broken and I cannot use it in this condition, I called and texted you about it but haven’t heard anything from you. Therefore I will not buy or suggest to anyone to buy anything from your company. Your rating with me is minus 10
4/30/2021
Q: The user manual shows the following pictures of the compound (with T-Slots) as in attached pictures. I do not see that on the picture. Can you confirm that the actual product has the design shown in the user manual?
Answers(1)
12/1/2021
A: yes, the actual product has the design shown in the user manual.
12/15/2021

Qty:
$2,875.60
$79.88 /mo
$79.88 /mo


Optional Accessories

Check items to add to the cart or  select all

  1. Bolton Tools D413 Live Center MT3 Taper

    Bolton Tools D413 Live Center MT3 Taper

    $34.92

    Add to Wishlist

  2. FP8-BT6132 Face Plate For BT6132 Bolton Lathe 8 inch

    FP8-BT6132 Face Plate For BT6132 Bolton Lathe 8 inch

    $65.36

    Add to Wishlist

  3. 7 PCS 1/2" Insert Tool Holders With Carbide Inserts set 12-126-S03

    7 PCS 1/2" Insert Tool Holders With Carbide Inserts set 12-126-S03

    $142.98

    Add to Wishlist

  4. 4 Jaw 8 inch Chuck Without Mounting Plate 4JCP8

    4 Jaw 8 inch Chuck Without Mounting Plate 4JCP8

    $193.19

    Add to Wishlist

  5. 7 PCS 1/4” Insert Tool Holder 12-126-S01

    7 PCS 1/4” Insert Tool Holder 12-126-S01

    $133.15

    Add to Wishlist