1. Pole size 1-31/32"
2. Avg. Max. holding power: 227.5psi (16kg/cm2)
3. Voltage: 220V 60Hz 3ph
4. Parallelism: 0.002mm/100mm
5. Output Max Current: 50A
1. Pole size 1-31/32''
2. Avg. Max. holding power: 227.5psi
3. Voltage: 220V 60Hz 3ph
4. Parallelism: 0.002mm/100mm
5. Output Max Current: 50A
1. Electricity-saving; electricity needed only for magnetization and demagnetization.
2. Quickly load and unload workpiece, more fixed than clamp plate saving 50% time.
3. Powerful magnetic force up to 1300kg / 100cm² (4-poles ).
4. Stable and excellent Magnetic Chuck, it could be used for a long time and never get high temperatures to affect the accuracy of workpieces.
5. The magnetic chuck surface is designed with special anti-rust treatment and waterproof connectors.
1. Electricity-saving; electricity needed only for magnetization and demagnetization.
2. Quickly load and unload workpiece, more fixed than clamp plate saving 50% time.
3. Powerful magnetic force up to 1300kg / 100cm² (4-poles ).
4. Stable and excellent Magnetic Chuck, it could be used for a long time and never get high temperatures to affect the accuracy of workpieces.
5. The magnetic chuck surface is designed with special anti-rust treatment and waterproof connectors.
1. Increase efficiency remarkably, magnetism constant
2. Waterproofness is good, allow to be used with cutting fluid
3. Intensive magnetic patch, can hold workpiece which thickness more than 2/25in strongly for milling process
4. Ndfeb magnets adopted
5. Maximum holding force can reach to 213psi (15kgf/cm2)
1. Increase efficiency remarkably, magnetism constant
2. Waterproofness is good, allow to be used with cutting fluid
3. Intensive magnetic patch, can hold workpiece which thickness more than 2/25in strongly for milling process
4. Ndfeb magnets adopted
5. Maximum holding force can reach to 213psi (15kgf/cm2)
1. Increase efficiency remarkably, magnetism constant
2. Waterproofness is good, allow to be used with cutting fluid
3. Intensive magnetic patch, can hold workpiece which thickness more than 2/25in strongly for milling process
4. Ndfeb magnets adopted
5. Maximum holding force can reach to 213psi (15kgf/cm2)
1. Increase efficiency remarkably, magnetism constant
2. Waterproofness is good, allow to be used with cutting fluid
3. Intensive magnetic patch, can hold workpiece which thickness more than 2/25in strongly for milling process
4. Ndfeb magnets adopted
5. Maximum holding force can reach to 213psi (15kgf/cm2)
1. Switch on/off, plane precision of magnetic plate is invariant.
2. Magnetic pole distance is narrow, suitable to small or thin workpiece.
3. High precision, small deformation, satisfy to high precision machining
4. Magnetic force distributes evenly, Max holding force of each pole can reach to 170psi (12kgf/cm2).
1. Switch on/off, plane precision of magnetic plate is invariant.
2. Magnetic pole distance is narrow, suitable to small or thin workpiece.
3. High precision, small deformation, satisfy to high precision machining
4. Magnetic force distributes evenly, Max holding force of each pole can reach to 170psi (12kgf/cm2).
1. Switch on/off, plane precision of magnetic plate is invariant.
2. Magnetic pole distance is narrow, suitable to small or thin workpiece.
3. High precision, small deformation, satisfy to high precision machining
4. Magnetic force distributes evenly, Max holding force of each pole can reach to 170psi (12kgf/cm2).
1. Switch on/off, plane precision of magnetic plate is invariant.
2. Magnetic pole distance is narrow, suitable to small or thin workpiece.
3. High precision, small deformation, satisfy to high precision machining
4. Magnetic force distributes evenly, Max holding force of each pole can reach to 170psi (12kgf/cm2).
1. Voltage: 2Ph 400V 60Hz
2. Holding force: 16kg/cm2
3. Holding force of square pole: 771.6 lb (350 kg)
4. Parallelism: 0.002mm/100mm
1. Voltage: 2Ph 400V 60Hz
2. Holding force: 16kg/cm2
3. Holding force of square pole: 771.6 lb (350 kg)
4. Parallelism: 0.002mm/100mm
1. Pole size 2-3/4''
2. Avg. Max. holding power 202 psi
3. Outside length 23-5/8"
4. Should used with electro permanent magnetic chuck controller, systems are switched ON or OFF with simple electrical pulse.
1. Electric controller
2. Electric controller, used with electro permanent magnetic chuck
1. Pole size:2-3/4''.
2. Outside Dia:9-27/32".
3. Avg. Max. holding power:202psi.
4. Should used with electro permanent magnetic chuck controller, systems are switched ON or OFF with simple electrical pulse.
1. The residual magnetism is no more than the 5% of suction
2. Avg. Max. Holding power: 213 psi
3. Overall Dimension: 5-29/32"L x 15-3/4"W x 2-3/32"
1. Compatible with System 3R
2. With air functional base
3. Material: stainless steel
4. Force power: 10000N
5. Size: 5-45/64" × 3-15/16" × 3-1/32" (145 × 100 × 77mm)
6. Accuracy: 0.00008" (0.002mm)
1. Compatible with EROWA
2. Size: 5.709" × 3.937" × 2.854" (145 × 100 × 72.5mm)
3. Material: Nippon Stainless steel
4. Force power: 10000N
5. Include AL plug and stainless steel handle 1pcs
1. Compatible with EROWA
2. Size: 3-1516" × 1-61/64" (∅100 × 49.5mm)
3. Material: Nippon stainless steel
4. Force power: 10000N
5. Included stainless steel handle 1pcs
6. EDM and WEDM centers for light milling and grinding work
1. Compatible with EROWA
2. Size: 3.15" × 3.15" × 2.598" (80 × 80 × 66mm)
3. Material: Nippon Stainless steel
4. Force power: 1348 lbf
5.It applies to EDM sinking machines with automatic electrode change, machine tools with automatic loading, production lines
1. Compatible with EROWA
2. Size: 5.709" x 3.937" x 2.854" ( 145 x 100 x 72.5mm)
3. Material: Nippon Stainless steel
4. Force power: 10000N
5. Hardness: 57-60HRC
6.Mounted on the electrode holder, power postion of bearing plate
1. Compatible with EROWA
2. Size: 4.016" × 4.016" × 2.854" (102 × 102 × 72.5mm)
3. Material: Nippon stainless steel
4. Force power: 10000N
5. 6 bar with air cleaning function
6. Best treatment to the details and surface
7.Strict inspection before delivery
8. Applies to accommodate pallet φ115/φ148, electrode holders and palles PM85
1. Compatible with EROWA
2. Size: 2.362" × 2.362" × 1.417" (60 × 60 × 36mm)
3. Materia: Nippon Stainless steel
4. Latest Design, not easy to loose
5. Force power: 4500N
1. Compatible with System 3R
2. Size: ø5.118" × 3.898" (∅130 × 99mm)
3. Material: Nippon Stainless steel
4. Force power: 2248 lbf
5. Suitable for EDM machine
6.Be used on CNC machine center processing EDM electrode for mould industry
7. It mouted on sinker EDM machine Head, With 3R pallet 54 x 54mm
8.Suitable for plastic injection mould making industry
1. The residual magnetism is no more than the 5% of suction.
2. Toatal Holding power: 35KN
3. It could meet the milling requirements on the direction of horizontal XY.