1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. It reduces tramp oil concentration in the coolant by 40% in an hour.
2. Coolant properties like cooling, rust prevention, ph value etc remain intact hence avoiding total replacement and disposal.
3. The system is portable and hence can be used for multiple machine tanks on the shopfloor.
4. The process of separation is mechanical i.e. there is no chemical reaction involved. Hence, the media is not consumed and hence does not need to be replaced.
5.Due to continuous pumping, the coolant is circulated and does not remain stagnant. This provides aeration and hence avoids bacterial growth leading to elimination of foul smell and chances of dermatitis.
6. There is no skill required in operating the unit. The design enables for plug in and forget about it operation.
1. Fits HSK63(A,B,C,D,E,F type) tool holder.
2. Solid casting structure and denser roller bearings to bite the tool holder, stronger and durable.
3. Easy to use, reduce the taper wear, improve the tool holder life and precision.
The most popular Multitool Accessory
Table can be tilted up 5° and down 50°
Miter bracket has positive lock degree gauge for precise miter angles
Provides support when grinding ends square and achieving accurate angle
1. +/- 0.0002" in Parallelism
2. Each parallel is 1/32" x 6" with 2 holes
3. Hardened and precision ground to HRC52 - 58
4. Includes 20 pairs of the following heights: 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8", 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1-1/2", 1-9/16", 1-5/8" &1-11/16"
1. Made of high quality casting steel for long life and increased durability
2. Made of high-grade steel and all the blocks, bolts, nuts and hold-downs are case hardened
3. T - Slot size: 13/16", Stud size: 5/8" - 11, 1-1/16" step block width
4. Includes 24 Studs 4 of each- 3", 4", 5", 6", 7", 8", 12 step blocks, 6 T - nuts, 6 flange nuts, 4 coupling nuts, 6 step clamp
The CBT2060-4JAW is a 4 Jaw Chuck for the CBT2060 that is used in the metalworking industries.
1. Material of tightening fixture: aluminum alloy, alloy steel composite.
2. It is more convenient and reliable compared with the traditional needle roller install.
3. No damage to the tool holder, could bear greater torque, avoid skidding.
4. Applicable model HSK-63A.
5. Use aluminum alloy, alloy steel composite.
6. Easy to install, reliable, Protect tool holder, Could bear greater torque, avoid skidding.
7. Production and sales integration.
8. Strict production & inspection process.
1. Drilling area: 4-5/16"
2. Drill capacity in mild steel: 1/2"
3. Number of spindles: 4
4. Speed ratio: 1:1
5. Versatile drilling and tapping operation
1. Comes in a plastic collet box.
2. Total runout less than 0.0003" on these precise ER11 collets.
3. The following sizes are included ER11-1/4, ER11-3/16, ER11-7/32, ER11-5/32, ER11-1/8, ER11-32/3, ER11-1/16
4. It can be widely used for boring, milling, drilling and tapping operation.
1. Material of tightening fixture: aluminum alloy, alloy steel composite
2. It is more convenient and reliable compared with the traditional needle roller install;
3. No damage to the tool holder, could bear greater torque, avoid skidding.
4. Applicable model HSK100A.
5. Use aluminum alloy, alloy steel composite.
6. Easy to install, reliable, Protect tool holder, Could bear greater torque, avoid skidding.
7. Production and sales integration.
8. Strict production & inspection process.
1. Material of tightening fixture: aluminum alloy, alloy steel composite
2. No damage to the tool holder, could bear greater torque, avoid skidding.
3. Applicable model CAT40 tool holder.