1. Made from alloy spring steel and hardened to HRC 44-48;
2. Under size 1/8 the runout is .00059";
3. Material: 65Mn;
4. Conform to DIN6499
1. Made from alloy spring steel and hardened to HRC 44-48;
2. Under size 1/8 the runout is .00059";
3. Material: 65Mn;
4. Conform to DIN6499
1. Made from alloy spring steel and hardened to HRC 44-48;
2. Under size 1/8 the runout is .00059";
3. Material: 65Mn;
4. Conform to DIN6499
1. Finish: Black Oxide
2. Runout: .005mm/.0002in TIR
3. Works on all CAT 40 machines
4. Made from alloy structural steel hardened to 48 - 52rc
5. 8000 rpms
6. Rear thread for pull stud is 5/8"-16
1. Finish: Black Oxide
2. Runout: .005mm/.0002in TIR
3. Works on all CAT 40 machines
4. Made from alloy structural steel hardened to 48 - 52rc
5. 8000 rpms
6. Rear thread for pull stud is 5/8"-16
1. Finish: Black Oxide
2. Runout: .005mm/.0002in TIR
3. Works on all CAT 40 machines
4. Made from alloy structural steel hardened to 48 - 52rc
5. 8000 rpms
6. Rear thread for pull stud is 5/8"-16
1. Finish: Black Oxide
2. Runout: .005mm/.0002in TIR
3. Works on all CAT 40 machines
4. Made from alloy structural steel hardened to 48 - 52rc
5. 8000 rpms
6. Rear thread for pull stud is 5/8"-16
1. Finish: Black Oxide
2. Runout: .005mm/.0002in TIR
3. Works on all CAT 40 machines
4. Made from alloy structural steel hardened to 48 - 52rc
5. 8000 rpms
6. Rear thread for pull stud is 5/8"-16
1. Finish: Black Oxide
2. Runout: .005mm/.0002in TIR
3. Works on all CAT 40 machines
4. Made from alloy structural steel hardened to 48 - 52rc
5. 8000 rpms
6. Rear thread for pull stud is 5/8"-16
1. Finish: Black Oxide
2. Runout: .005mm/.0002in TIR
3. Works on all CAT 40 machines
4. Made from alloy structural steel hardened to 48 - 52rc
5. 8000 rpms
6. Rear thread for pull stud is 5/8"-16
1. Finish: Black Oxide
2. Runout: .005mm/.0002in TIR
3. Works on all CAT 40 machines
4. Made from alloy structural steel hardened to 48 - 52rc
5. 8000 rpms
6. Rear thread for pull stud is 5/8"-16
1. Finish: Black Oxide
2. Runout: .005mm/.0002in TIR
3. Works on all CAT 40 machines
4. Made from alloy structural steel hardened to 48 - 52rc
5. 8000 rpms
6. Rear thread for pull stud is 5/8"-16
1. Finish: Black Oxide
2. Runout: .005mm/.0002in TIR
3. Works on all CAT 40 machines
4. Made from alloy structural steel hardened to 48 - 52rc
5. 8000 rpms
6. Rear thread for pull stud is 5/8"-16
1. Finish: Black Oxide
2. Runout: .005mm/.0002in TIR
3. Works on all CAT 40 machines
4. Made from alloy structural steel hardened to 48 - 52rc
5. 8000 rpms
6. Rear thread for pull stud is 5/8"-16
1. Finish: Black Oxide
2. Runout: .005mm/.0002in TIR
3. Works on all CAT 40 machines
4. Made from alloy structural steel hardened to 48 - 52rc
5. 8000 rpms
6. Rear thread for pull stud is 5/8"-16
1. Finish: Black Oxide
2. Runout: .005mm/.0002in TIR
3. Works on all CAT 40 machines
4. Made from alloy structural steel hardened to 48 - 52rc
5. 8000 rpms
6. Rear thread for pull stud is 5/8"-16
1. Made from alloy spring steel and hardened to HRC 44-48;
2. Under size 1/8 the runout is .00059";
3. Material: 65Mn;
4. Conform to DIN6499
1. Finish: Black Oxide
2. Runout: .005mm/.0002in TIR
3. Works on all BT 40 machines
4. Made from alloy structural steel hardened to 48 - 52rc
5. 8000 rpms
6. Rear thread for pull stud is M16
1. Finish: Black Oxide
2. Runout: .005mm/.0002in TIR
3. Works on all BT 40 machines
4. Made from alloy structural steel hardened to 48 - 52rc
5. 8000 rpms
6. Rear thread for pull stud is M16
1. Finish: Black Oxide
2. Runout: .005mm/.0002in TIR
3. Works on all BT 40 machines
4. Made from alloy structural steel hardened to 48 - 52rc
5. 8000 rpms
6. Rear thread for pull stud is M16
1. Finish: Black Oxide
2. Runout: .005mm/.0002in TIR
3. Works on all BT 40 machines
4. Made from alloy structural steel hardened to 48 - 52rc
5. 8000 rpms
6. Rear thread for pull stud is M16
1 made fo high-quality alloy steel.the hardness of working surface reaches HRC58~62
2 parallelism 0.005mm/100mm
3 quickly to clamp and easy to operate
4 used for precision measurement and in spection precision grinding EDM and wire-cutting machine
5 Guarantee high accuracy in any position
1. High-quality alloy steel
2. Parallelism 0.005mm/100mm
3. Quickly to clamp and easy to operate
4. Guarantee high accuracy in any position
1. High-quality alloy steel
2. Parallelism 0.005mm/100mm
3. Quickly to clamp and easy to operate
4. Guarantee high accuracy in any position
1. High-quality alloy steel
2. Parallelism 0.005mm/100mm
3. Quickly to clamp and easy to operate
4. Hardness of working surface reaches HRC58~62
5. Guarantee high accuracy in any position
1. Made from alloy spring steel and hardened to HRC 44-48;
2. Under size 1/8 the runout is .00059";
3. Material: 65Mn;
4. Conform to DIN6499
1. Made from alloy spring steel and hardened to HRC 44-48;
2. Under size 1/8 the runout is .00059";
3. Material: 65Mn;
4. Conform to DIN6499
1. Made from alloy spring steel and hardened to HRC 44-48;
2. Under size 1/8 the runout is .00059";
3. Material: 65Mn;
4. Conform to DIN6499
1. Made from alloy spring steel and hardened to HRC 44-48;
2. Under size 1/8 the runout is .00059";
3. Material: 65Mn;
4. Conform to DIN6499
1. Made from alloy spring steel and hardened to HRC 44-48;
2. Under size 1/8 the runout is .00059";
3. Material: 65Mn;
4. Conform to DIN6499
1. Made from alloy spring steel and hardened to HRC 44-48;
2. Under size 1/8 the runout is .00059";
3. Material: 65Mn;
4. Conform to DIN6499
1. Made from alloy spring steel and hardened to HRC 44-48;
2. Under size 1/8 the runout is .00059";
3. Material: 65Mn;
4. Conform to DIN6499
1. Made from alloy spring steel and hardened to HRC 44-48;
2. Under size 1/8 the runout is .00059";
3. Material: 65Mn;
4. Conform to DIN6499
1. Made from alloy spring steel and hardened to HRC 44-48;
2. Under size 1/8 the runout is .00059";
3. Material: 65Mn;
4. Conform to DIN6499
1. Made from alloy spring steel and hardened to HRC 44-48;
2. Under size 1/8 the runout is .00059";
3. Material: 65Mn;
4. Conform to DIN6499
1. Made from alloy spring steel and hardened to HRC 44-48;
2. Under size 1/8 the runout is .00059";
3. Material: 65Mn;
4. Conform to DIN6499
1. Made from alloy spring steel and hardened to HRC 44-48;
2. Under size 1/8 the runout is .00059";
3. Material: 65Mn;
4. Conform to DIN6499
1. Made from alloy spring steel and hardened to HRC 44-48;
2. Under size 1/8 the runout is .00059";
3. Material: 65Mn;
4. Conform to DIN6499
1. Made from alloy spring steel and hardened to HRC 44-48;
2. Under size 1/8 the runout is .00059";
3. Material: 65Mn;
4. Conform to DIN6499
1. Made from alloy spring steel and hardened to HRC 44-48;
2. Under size 1/8 the runout is .00059";
3. Material: 65Mn;
4. Conform to DIN6499
1. Made from alloy spring steel and hardened to HRC 44-48;
2. Under size 1/8 the runout is .00059";
3. Material: 65Mn;
4. Conform to DIN6499
1. Made from alloy spring steel and hardened to HRC 44-48;
2. Under size 1/8 the runout is .00059";
3. Material: 65Mn;
4. Conform to DIN6499