1. Material: Allyed case hardened steel, black-finished and precisely grinding
2. Hardness: HRC 56-58
3. T.I.R: ≤0.0002"
4. Carbon depth: 0.016" to 0.047"
5. Projection: 6"
6. Collet Chuck accepts all ER16 collets
1. Material: Allyed case hardened steel, black-finished and precisely grinded
2. Hardness: HRC 56-58
3. Max. run out: <0.0002"
4. Carbon depth: 0.016" to 0.047"
5. Projection: 4"
6. Collet chuck accepts all ER25 collet
1. Material: Allyed case hardened steel, black-finished and precisely grinded
2. Hardness: HRC 56-58
3. Max. run out: <0.0002"
4. Carbon depth: 0.016" to 0.047"
5. Projection: 4"
6. Collet chuck accepts all ER32collet
1. Material: Allyed case hardened steel, black-finished and precisely grinded
2. Hardness: HRC 56-58
3. Max. run out: <0.0002"
4. Carbon depth: 0.016" to 0.047"
5. Projection: 2-3/4" (70mm)
6. Collet chuck accepts all ER40 collet
1. Material: Allyed case hardened steel, black-finished and precisely grinded
2. Hardness: HRC 56-58
3. Max. run out: <0.0002"
4. Carbon depth: 0.016" to 0.047"
5. Projection: 3-3/8"
6. For 3/4" straight shank end mill
7. include 5/8-1 setscrews
1. Material: Allyed case hardened steel, black-finished and precisely grinded
2. Hardness: HRC 56-58
3. Max. run out: <0.0002"
4. Carbon depth: 0.016" to 0.047"
5. Projection: 2-3/4"
6. For 5/8" straight shank end mill
7. include setscrews
1. Material: Allyed case hardened steel, black-finished and precisely grinded
2. Hardness: HRC 56-58
3. Max. run out: <0.0002"
4. Carbon depth: 0.016" to 0.047"
5. Projection: 2-1/2"
6. For 3/8" straight shank end mill
7. include 3/8-24 setscrews
1. Material: Allyed case hardened steel, black-finished and precisely grinded
2. Hardness: HRC 56-58
3. Max. run out: <0.0002"
4. Carbon depth: 0.016" to 0.047"
5. Projection: 2-1/2"
6. For 1/4" straight shank end mill
1. Material: Allyed case hardened steel, black-finished and precisely grinded
2. Hardness: HRC 56-58
3. Max. run out: <0.0002"
4. Carbon depth: 0.016" to 0.047"
5. Projection: 2-5/8"
6. For 5/8" straight shank end mill
7. include 7/16-20 setscrews
1. Material: Alloy case hardened steel, black-finishedand precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricityof the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 andB6339
1. Material: Allyed case hardened steel, black-finished and precisely grinded
2. Hardness: HRC 56-58
3. Max. run out: <0.0002"
4. Carbon depth: 0.016" to 0.047"
5. Projection: 4-5/8"
6. For 1-1/2" straight shank end mill
7. include 3/4-16 setscrews
1. Material: Allyed case hardened steel, black-finished and precisely grinded
2. Hardness: HRC 56-58
3. Max. run out: <0.0002"
4. Carbon depth: 0.016" to 0.047"
5. Projection: 4-1/2"
6. For 1-1/4" straight shank end mill
7. include 3/4-16 setscrews
1. Material: Allyed case hardened steel, black-finished and precisely grinded
2. Hardness: HRC 56-58
3. Max. run out: <0.0002"
4. Carbon depth: 0.016" to 0.047"
5. Projection: 4"
6. For 1" straight shank end mill
7. include 3/4-16 setscrews
1. Material: Allyed case hardened steel, black-finished and precisely grinded
2. Hardness: HRC 56-58
3. TIR ≤ 0.0002"
4. Carbon depth: 0.016" to 0.047"
5. Projection: 1-1/2"
6. Include heat-treated and coated carbon steel nut
1. CAT NO tapershank is in conformity with AT3 standard
2. Fittingtolerance H6 for straight sets
Model No. | D | L | Weight(kg) |
R8-FMA1" | 25.4 | 40 | 0.9 |
R8-FMA3/4" | 19.05 | 40 | 0.8 |
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Material: Allyed case hardened steel, black-finished and precisely grinded
2. Hardness: HRC 56-58
3. Max. run out: <0.0001"
4. Carbon depth: 0.016" to 0.047"
5. Projection: 2.76"
6. Collet chuck accepts all ER32 collet
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Allyed case hardened steel, black-finished and precisely grinded
2. Hardness: HRC 56-58
3. Max. run out: <0.0001"
4. Carbon depth: 0.016" to 0.047"
5. Projection: 3-15/16"
6. Collet chuck accepts all ER32 collet
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Allyed case hardened steel, black-finished and precisely grinded
2. Hardness: HRC 56-58
3. Max. run out: <0.0001"
4. Carbon depth: 0.016" to 0.047"
5. Projection: 7.87"
6. Collet chuck accepts all ER32 collet
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and B6339
7. Pilot Dia.: 1-1/2"
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and B6339
7. Pilot diameter: 2"
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Material: Alloy case hardened steel, black-finished
and precisely grinded.
2. Hardness: HRC 56-58
3. Carbon depth: 1/32" ± 1/64"
4. Runout: < 0.0002"
5. Concentricity
of the inner and outer cone: 0.0002"
6. Shank body standard: MAS 403 and
B6339
1. Hardness:46~50HRC
2. Runout is 0.00059”
3. 16slot
1. Material: Allyed case hardened steel, black-finished and precisely grinding
2. Hardness: HRC 56-58
3. T.I.R: ≤0.0002"
4. Carbon depth: 0.016" to 0.047"
5. Projection: 2.76"
6. Collet Chuck accepts all ER16 collets
1. Material: Allyed case hardened steel, black-finished and precisely grinding
2. Hardness: HRC 56-58
3. T.I.R: ≤0.0002"
4. Carbon depth: 0.016" to 0.047"
5. Projection: 4"
6. Collet chuck accepts all ER16 collets
1. Material: Allyed case hardened steel, black-finished and precisely grinded
2. Hardness: HRC 56-58
3. Max run out: <0.0002"
4. Carbon depth: 0.016" to 0.047"
5. Projection: 2-3/4"
6. Collet chuck accepts all ER20 collet
1. Material: Allyed case hardened steel, black-finished and precisely grinded
2. Hardness: HRC 56-58
3. Max. run out: <0.0002"
4. Carbon depth: 0.016" to 0.047"
5. Projection: 4"
6. Collet chuck accepts all ER20 collet
1. Material: Allyed case hardened steel, black-finished and precisely grinding
2. Hardness: HRC 56-58
3. T.I.R: ≤0.0002"
4. Carbon depth: 0.016" to 0.047"
5. Projection: 2.76"
6. Collet Chuck accepts all ER25 collets
1. Material: Allyed case hardened steel, black-finished and precisely grinded
2. Hardness: HRC 56-58
3. Max run out: <0.0002"
4. Carbon depth: 0.016" to 0.047"
5. Projection: 2.76"
6. Collet Chuck accepts all ER32 collets
1. Material: Allyed case hardened steel, black-finished and precisely grinding
2. Hardness: HRC 56-58
3. T.I.R: ≤0.0002"
4. Carbon depth: 0.016" to 0.047"
5. Projection: 3.15"
6. Collet chuck accepts all ER40 collets
1. Material:Allyed case hardened steel,black-finished and precisely grinded
2. Hardness: HRC 56-58
3. Max run out: <0.0002"
4. Carbon depth: 1/32" ± 1/64"
5. Surface Roughness: Ra<0.0002"
1. Material: Allyed case hardened steel, black-finished and precisely grinded
2. Hardness: HRC 56-58
3. Max run out: <0.0002"
4. Carbon depth: 1/32" ± 1/64"
5. Surface Roughness: Ra<0.0002"
1. Material: Allyed case hardened steel, black-finished and precisely grinded
2. Hardness: HRC 56-58
3. Max run out: <0.0002"
4. Carbon depth: 1/32" ± 1/64"
5. Projection: 2.76"
6. Clamping range: 1/64" - 3/8"
1. Material: Allyed case hardened steel,black-finished and precisely grinded
2. Hardness: HRC 56-58
3. Max run out: <0.0002"
4. Carbon depth: 1/32" ± 1/64"
5. Projection: 2.76"
6. Clamping range: 1/64" - 5/8"
1. Material: Allyed case hardened steel, black-finished and precisely grinded
2. Hardness: HRC 56-58
3. Max. run out: <0.0002"
4. Carbon depth: 0.016" to 0.047"
5. Projection: 2-1/2"
6. For 3/8" straight shank end mill
7. include 3/8-24 setscrews
1. Material: Allyed case hardened steel, black-finished and precisely grinded
2. Hardness: HRC 56-58
3. Max. run out: <0.0002"
4. Carbon depth: 0.016" to 0.047"
5. Projection: 4-1/4"
6. For 1-1/4" straight shank end mill
1. Material: Allyed case hardened steel, black-finished and precisely grinded
2. Hardness: HRC 56-58
3. Max. run out: <0.0002"
4. Carbon depth: 0.016" to 0.047"
5. Projection: 4-1/4"
6. For 1/4" straight shank end mill
1. Material: Allyed case hardened steel, black-finished and precisely grinded
2. Hardness: HRC 56-58
3. Max. run out: <0.0002"
4. Carbon depth: 0.016" to 0.047"
5. Projection: 2-5/8"
6. For 1/2" straight shank end mill
1. Material: Allyed case hardened steel, black-finished and precisely grinded
2. Hardness: HRC 56-58
3. Max. run out: <0.0002"
4. Carbon depth: 0.016" to 0.047"
5. Projection: 3-3/4"
6. For 5/8" straight shank end mill
1. Material: Allyed case hardened steel, black-finished and precisely grinded
2. Hardness: HRC 56-58
3. TIR ≤ 0.0002"
4. Carbon depth: 0.016" to 0.047"
5. Projection: 1-3/8"
6. Include heat-treated and coated carbon steel nut
1. Material: Allyed case hardened steel, black-finished and precisely grinded
2. Hardness: HRC 56-58
3. TIR ≤ 0.0002"
4. Carbon depth: 0.016" to 0.047"
5. Projection: 2.06"
6. Include heat-treated and coated carbon steel nut
1. Hardness: HRC 56-58
2. Carbon depth: 1/32" ± 1/64"
3. T.R.I. ≤0.0002"
4. Shank body standard: ANSI B5.50