BT0919
Bench Lathe Tailstock Clamp - BT0919TS007
Specification: 8001
BT0919
Bench Lathe Tailstock Lead Screw - BT0919TS002
Specification: 8010
BT0919
Bench Lathe Tailstock Ram - BT0919TS001
Specification: 8009
1. Material: Medium carbon steel
2. Finish: Machined
3. Overall lengh: 2-1/16 inch
4. Stem length: 3/8 inch
5. Stem Size: #10-24
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.00059" at 4xd position.
1. Pull stud for CAT40 tool holder.
2. Rear thread is 5/8-11.
3. Parlec type is 40TRK.
1. Pull stud for CAT40 tool holder.
2. Rear thread is 5/8-11.
3. Parlec type is 4009TRK.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. WARRANTY: 1-YEAR.
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.0003" at 4xD position.
6. Clamping Range: 0.3488"-0.3044", Overall Length: 1.06".
1. WARRANTY: 1-YEAR.
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.0003" at 4xD position.
6. Clamping Range: 0.1250"-0.0856", Overall Length: 1.24".
1. WARRANTY: 1-YEAR.
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.0003" at 4xD position.
6. Clamping Range: 0.1563"-0.1169", Overall Length: 1.24".
1. WARRANTY: 1-YEAR.
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.0003" at 4xD position.
6. Clamping Range: 0.3438"-0.3044", Overall Length: 1.24".
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.00059" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.00059" at 4xd position.
1
1. Fit any 5C collet supplied with thread rod
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. WARRANTY: 1-YEAR
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.00059" at 4xD position.
6. Clamping Range: 0.0938"-0.0544", Overall Length: 1.38".
1.WARRANTY: 1-YEAR
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.0003" at 4xD position.
6. Clamping Range: 0.1875"-0.1481", Overall Length: 1.38".
1. WARRANTY: 1-YEAR
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.0003" at 4xD position.
6. Clamping Range: 0.3125"-0.2731", Overall Length:1.38".
1. WARRANTY: 1-YEAR
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.0003" at 4xD position.
6. Clamping Range: 0.3750"-0.3356", Overall Length: 1.38".
1. WARRANTY: 1-YEAR
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.0003" at 4xD position.
6. Clamping Range: 0.4375"-0.3981", Overall Length: 1.38".
1. WARRANTY: 1-YEAR
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.0003" at 4xD position.
6. Clamping Range: 0.5625"-0.5231", Overall Length: 1.38".
1. WARRANTY: 1-YEAR
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.0003" at 4xD position.
6. Clamping Range: 0.6250"-0.5856", Overall Length: 1.38".
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.00059" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Hardness: HRC40-45
2. Material: 45# steel
3. Black oxide surface
4. Collet nut diameter: 2.48"
5. Thread size: M50 x 1.5
1. WARRANTY: 1-YEAR
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.00059" at 4xD position.
6. Clamping Range: 0.0938"-0.0741", Overall Length: 1.58".
1. WARRANTY: 1-YEAR
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.0003" at 4xD position.
6. Clamping Range: 0.3125"-0.2731", Overall Length: 1.58".
1. WARRANTY: 1-YEAR
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.0003" at 4xD position.
6. Clamping Range: 0.4375"-0.3981", Overall Length: 1.58".
1. WARRANTY: 1-YEAR
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.0003" at 4xD position.
6. Clamping Range: 0.5625"-0.5231", Overall Length: 1.58".
1. Made of special 65Mn alloy steel and hardened to HRc 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Material: Carbon steel
2. Finish: Chrome plated
3. End: Threaded
1. Machine Taper: BT30
2. Angle Degree: 45 degrees
3. Thread: M12 × 1.75
4. Non coolant - thru
5. Overall Length: 1 - 11/16"
1. WARRANTY: 1-YEAR
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.00059" at 4xD position.
6. Clamping Range: 0.1875"-0.1481", Overall Length: 1.78".
1. WARRANTY: 1-YEAR.
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.0003" at 4xD position.
6. Clamping Range: 0.2500"-0.2106", Overall Length: 1.78".
1. WARRANTY: 1-YEAR.
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.0003" at 4xD position.
6. Clamping Range: 0.4375"-0.3981", Overall Length: 1.78".
1. WARRANTY: 1-YEAR
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.0003" at 4xD position.
6. Clamping Range: 0.5625"-0.5231", Overall Length: 1.78".
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Mount type: 3/8"-24 UNF thread mounted
2. Runout: .004" TIR
3. Clamping range: 1/64" - 1/4"
4. Chuck key included
1. Mount type: 3/8" - 24 UNF thread mounted
2. Runout: 0.004" TIR
3. Clamping range: 1/32" - 3/8"
4. Chuck key included
1. Machine Taper: BT40
2. Angle Degree: 45 degrees
3. Thread: M16 × 2
4. Non coolant - thru
5. Overall Length: 2 - 23/64"
1. Size MT2 × JT0
2. Hardened and precision ground
3. Made of high-grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. 5/8" straight shank, 33 jacobs taper
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. 3/8" straight shank, 0 jacobs taper
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. 3/8" straight shank, 1 jacobs taper
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. 1/2" straight shank, 0 jacobs taper
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. 1/2" straight shank, 1 jacobs taper
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. 1/2" straight shank, 2 jacobs taper
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. 1/2" straight shank, 3 jacobs taper
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. 1/2" straight shank, 6 jacobs taper
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. 1/2" straight shank, 33 jacobs taper
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. Size MT2 × JT1
2. Hardened and precision ground
3. Made of high-grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. Size MT2 × JT2
2. Hardened and precision ground
3. Made of high-grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. Size MT2 × JT3
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. Size MT2 × JT6
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. Size MT2 × JT33
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"