Machine Tool Accessories

1. Machine Taper: BT30

2. Angle Degree: 45 degrees

3. Thread: M12 × 1.75

4. Non coolant - thru

5. Overall Length: 1 - 11/16"

1. Machine Taper: BT40

2. Angle Degree: 45 degrees

3. Thread: M16 × 2

4. Non coolant - thru

5. Overall Length: 2 - 23/64"

1. TIR: ≤0.0002"
2. Balanced to G6.3 at 10,000 rpms
3. Works on all CAT50 Machines
4. Through-spindle coolant capability

1. TIR: ≤0.0002"
2. Balanced to G6.3 at 10,000 rpms
3. Works on all CAT50 Machines
4. Through-spindle coolant capability

1. TIR: ≤0.0002"
2. Balanced to G6.3 at 10,000 rpms
3. Works on all CAT50 Machines
4. Through-spindle coolant capability

1. TIR: ≤0.0002"
2. Balanced to G6.3 at 10,000 rpms
3. Works on all CAT50 Machines
4. Through-spindle coolant capability

Cobra Carbide provides customers with products and services that fulfil their needs at the right price. They use the latest technology in CNC to produce the finest geometry for maximum efficiency. They are committed to providing the best quality for the best price.

1. Made of special 65Mn alloy steel and hardened to HRC 46-50.

2. It can be widely used for boring, milling, drilling and tapping operation.

3. All critical collet surfaces are precision ground for accurate fit.

4. Runout tolerance within 0.0003" at 4xd position.

1. Machine Taper: CAT40

2. Angle Degree: 45 degrees

3. Thread: 5/8" - 11

4. Coolant - thru

5. Overall Length: 1-1/2"

1. Machine Taper: CAT50

2. Angle Degree: 45 degrees

3. Thread: 1" - 8

4. Coolant - thru

5. Overall Length: 2-19/64"

1. Has an internal thread of 22mm X 1.5 pitch

2. Balanced to 20000rpm at G2.5

3. Outside diameter is 1-7/64" (28mm)

4. Outside hex for tightening is 63/64"(25mm) across flats

5. ER16-Wrench works on this collet nut

1. ER25 Collet Nut has an internal thread of M32 X 1.5 pitch

2. Outside diameter is 1-21/32" (42mm)

3. ER25 Collet Nut holds all ER25 collets

4. ER25-Wrench works on this collet nut

5. Balanced to 20000rpm at G2.5

1. ER32 Collet Nut has an internal thread of M40 X 1.5 pitch

2. Outside diameter is 1-31/32" (50mm)

3. ER32 Collet Nut holds all ER32 collets

4. ER32-Wrench works on this collet nut

1. ER40 Collet Nut has an internal thread of M50 X 1.5 pitch

2. Outside diameter is 2-31/64" (63mm)

3. ER40 Collet Nut holds all ER40 collets

4. ER40-Wrench works on this collet nut

5. Balanced to 20000rpm at G2.5

1. ANSI Number: WNMG080404; ISO Number: WNMG431 

2. Material: Carbide

3. Used for Steel,

4.Coating Process:PVD

1. 80° rhombic insert;

2. ANSI Number: CCMT431; ISO Number: CCMT120404;

3. Material: Carbide;

4. Used for Steel, Stainless Steel, Hard Steel;

1. 80° rhombic insert;

2. ANSI Number: CCMT432; ISO Number: CCMT120408;

3. Material: Carbide;

4.Used for Steel, Stainless Steel, Hard Steel;

1. 80° rhombic insert;

2. ANSI Number: CCMT2152; ISO Number: CCMT060208;

3. Material: Carbide;

4. 4. Used for Steel;

1. 80° rhombic insert;

2.Quantity:10pcs

3.Used for Aluminum;

4. ANSI Number:CCGT2152; ISO Number:CCGT060208;

5. Material: Carbide

1. 80° rhombic insert;

2. ANSI Number: CCGT3252; ISO Number: CCGT09T308;

3. Material: Carbide;

4. Used for Aluminum;

1. 55° rhombic insert;

2. ANSI Number: DCGT3252; ISO Number: DCGT11T308;

3. Material: Carbide;

4. Used for Aluminum;

1. 60° rhombic insert;

2. ANSI Number: TCMT2151; ISO Number: TCMT110204;

3. Material: Carbide;

4. Used for Steel;

1. 60° rhombic insert;

2. ANSI Number: TCGT2152; ISO Number: TCGT110208;

3. Material: Carbide;

4. Used for Aluminum;

1. 60° rhombic insert;

2. ANSI Number: TCGT32505; ISO Number: TCGT16T302;

3. Material: Carbide;

4. Used for Aluminum;

1. 60° rhombic insert;

2. ANSI Number: TCGT3251; ISO Number: TCGT16T304;

3. Material: Carbide;

4. Used for Aluminum;

1. ISO Number: SPMG200;

2. Material: Carbide;

3. Used for Steel;

1. ISO Number: SPMG300;

2. Material: Carbide;

3. Used for Steel;

1. ISO Number: SPMG400;

2. Material: Carbide;

3. Used for Steel;

1. ISO Number: MGMN400T;

2. Material: Carbide;

3. Used for Steel;stainsteel;

1. 55° rhombic insert;

2. ANSI Number: TDC5;

3. Material: Carbide;

4. Used for Steel;stainless steel;

1. Pole size 1-31/32"
2. Avg. Max. holding power: 227.5psi (16kg/cm2)
3. Voltage: 220V 60Hz 3ph
4. Parallelism: 0.002mm/100mm
5. Output Max Current: 50A

Made in Taiwan

1. Chemical Data : Co(%):12/WC incl.Doping(%):88
2. Density ISO 3369 (g/cm3) : 14.1
3. Hardness HV30 ISO 3878 : 1680
4. Hardness HRA ISO 3778 : 92.3
5. Transverse Rupture Strength (N/mm2) : >3800
6. Transverse Rupture Strength (1000 psi) : >551
7. Microstructure : 0.5
8. ISO-Range:  K40~K50
9. Work Material :  Stainless steel, Titanium alloys, Non Ferrous metals, Corrosion and Heat resistant steels

1. It reduces tramp oil concentration in the coolant by 40% in an hour.

2. Coolant properties like cooling, rust prevention, ph value etc remain intact hence avoiding total replacement and disposal.

3. The system is portable and hence can be used for multiple machine tanks on the shopfloor.

4. The process of separation is mechanical i.e. there is no chemical reaction involved. Hence, the media is not consumed and hence does not need to be replaced.

5.Due to continuous pumping, the coolant is circulated and does not remain stagnant. This provides aeration and hence avoids bacterial growth leading to elimination of foul smell and chances of dermatitis.

6. There is no skill required in operating the unit. The design enables for plug in and forget about it operation.

Made in Italy

IMS Part code: CAT40026X3.0

Made in Italy

IMS Part code: CAT40027X2.76

Made in Italy

IMS Part code: CAT40027X3.0

Made in Italy

IMS Part code: CAT40027X4.0

Made in Italy

IMS Part code: CAT40028X2.76

Made in Italy

IMS Part code: CAT40028X3.0

Made in Italy

IMS Part code: CAT40303X3.0

Made in Italy

IMS Part code: CAT40305X3.0

Made in Italy

IMS Part code: CAT40307X3.0

Made in Italy

IMS Part code: CAT40309X3.0

Made in Italy

IMS Part code: CAT40207X3.0

Made in Italy

IMS Part code: CAT40209X3.0

Made in Italy

IMS Part code: SCAT40327L3

Made in Italy

IMS Part code: CAT50305X4.0

Made in Italy

IMS Part code: CAT50307X4.0

Made in Italy

IMS Part code: CAT50027X4.0

Made in Italy

IMS Part code: CAT50028X4.0

Made in Italy

IMS Part code: BT40-ER32-70

Made in Italy

IMS Part code: BT40-ER20UM-70

Made in Italy

IMS Part code: BT40-ER16UM-63

Made in Italy

IMS Part code: HSK63A29027

1. Fits HSK63(A,B,C,D,E,F type) tool holder.

2. Solid casting structure and denser roller bearings to bite the tool holder, stronger and durable.

3. Easy to use, reduce the taper wear, improve the tool holder life and precision.