1. WARRANTY: 1-YEARS.
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.00059" at 4xD position.
6. Clamping Range: 0.2500"-0.2303", Overall Length: 0.708".
1. WARRANTY: 1-YEAR.
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.0003" at 4xD position.
6. Clamping Range: 0.3488"-0.3044", Overall Length: 1.06".
1. WARRANTY: 1-YEAR.
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.0003" at 4xD position.
6. Clamping Range: 0.1563"-0.1169", Overall Length: 1.24".
1. WARRANTY: 1-YEAR.
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.0003" at 4xD position.
6. Clamping Range: 0.3438"-0.3044", Overall Length: 1.24".
1. WARRANTY: 1-YEAR
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.00059" at 4xD position.
6. Clamping Range: 0.0938"-0.0544", Overall Length: 1.38".
1.WARRANTY: 1-YEAR
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.0003" at 4xD position.
6. Clamping Range: 0.1875"-0.1481", Overall Length: 1.38".
1. WARRANTY: 1-YEAR
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.0003" at 4xD position.
6. Clamping Range: 0.3125"-0.2731", Overall Length:1.38".
1. WARRANTY: 1-YEAR
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.0003" at 4xD position.
6. Clamping Range: 0.3750"-0.3356", Overall Length: 1.38".
1. WARRANTY: 1-YEAR
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.0003" at 4xD position.
6. Clamping Range: 0.4375"-0.3981", Overall Length: 1.38".
1. WARRANTY: 1-YEAR
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.0003" at 4xD position.
6. Clamping Range: 0.5000"-0.4606", Overall Length: 1.38".
1. WARRANTY: 1-YEAR
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.0003" at 4xD position.
6. Clamping Range: 0.5625"-0.5231", Overall Length: 1.38".
1. WARRANTY: 1-YEAR
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.0003" at 4xD position.
6. Clamping Range: 0.6250"-0.5856", Overall Length: 1.38".
1. WARRANTY: 1-YEAR
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.00059" at 4xD position.
6. Clamping Range: 0.0938"-0.0741", Overall Length: 1.58".
1. WARRANTY: 1-YEAR
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.0003" at 4xD position.
6. Clamping Range: 0.3125"-0.2731", Overall Length: 1.58".
1. WARRANTY: 1-YEAR
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.0003" at 4xD position.
6. Clamping Range: 0.4375"-0.3981", Overall Length: 1.58".
1. WARRANTY: 1-YEAR
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.0003" at 4xD position.
6. Clamping Range: 0.5625"-0.5231", Overall Length: 1.58".
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, dring and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xD position.
5. Clamping Range: 0.6250"-0.5856", Overall Length: 1.58".
1. WARRANTY: 1-YEAR
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.00059" at 4xD position.
6. Clamping Range: 0.1875"-0.1481", Overall Length: 1.78".
1. WARRANTY: 1-YEAR
2. Overall Length: 4.5"
3. Model#: MCLNL 12-4B
4. Insert not included
1. WARRANTY: 1-YEAR
2. Overall Length: 6"
3. Model#: MCLNL 16-4D
4. Insert not included
1. WARRANTY: 1-YEAR
2. Overall Length: 6"
3. Model#: MDJNL 16-4D
4. Insert not included
1. WARRANTY: 1-YEAR
2. Overall Length: 6"
3. Model#: MWLNL 16-4D
4. Insert not included
1. WARRANTY: 1-YEAR
2. Overall Length: 12"
3. Model#: S16T-SCLCR-3
4. Insert not included
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 10,000 rpms
3. Works on all CAT50 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 10,000 rpms
3. Works on all CAT50 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 10,000 rpms
3. Works on all CAT50 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 10,000 rpms
3. Works on all CAT50 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 10,000 rpms
3. Works on all CAT50 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 10,000 rpms
3. Works on all CAT50 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0001"
2. Balanced to G2.5 at 25,000 rpms
3. Works on all CAT40 Machines
4. Standard with AD coolant entry
1. Comes in a plastic collet box.
2. Full set covers all sizes from 0.0429 to 0.5000".
3. Total runout less than 0.0003" on these precise ER20 collets.
4. The following sizes are included 1/16 1/8 5/32 3/16 7/32 1/4 5/16 11/32 3/8 13/32 7/16 1/2.
5. It can be widely used for boring, milling, drilling and tapping operation.
1. Comes in a plastic collet box.
2. Full set covers all sizes from 0.0429 to 0.6250".
3. Total runout less than 0.0003" on these precise ER25 collets.
4. The following sizes are included 1/16 3/32 1/8 3/16 7/32 1/4 5/16 11/32 3/8 13/32 7/16 1/2 17/32 9/16 5/8.
5. It can be widely used for boring, milling, drilling and tapping operation.
1. Comes in a plastic collet box.
2. Full set covers all sizes from 0.0741" to 0.7500".
3. Total runout less than 0.0003" on these precise ER32 collets.
4. The following sizes are included 3/32 1/8 3/16 7/32 1/4 5/16 11/32 3/8 13/32 7/16 1/2 17/32 9/16 5/8 21/32 11/16 23/32 3/4.
5. It can be widely used for boring, milling, drilling and tapping operation.
1. Comes in a plastic collet box.
2. Full set covers all sizes from 0.0850" to 1.000".
3. Total runout less than 0.0003" on these precise ER40 collets.
4. The following sizes are included 1/8 3/16 7/32 1/4 5/16 11/32 3/8 13/32 7/16 1/2 17/32 9/16 5/8 21/32 11/16 23/32 3/4 13/16 27/32 7/8 15/16 31/32 1.
5. It can be widely used for boring, milling, drilling and tapping operation.
1. Made of special 65Mn alloy steel and hardened to HRc 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Accurate repeatability within 0.0012".
2. Free to assemble for required cutting depth and diameter.
3. The boring diameter is 0.78"-1.06".
4. Connection mechanism is based on a simple design but assures strong face contact.
1. Accurate repeatability within 0.0012".
2. Free to assemble for required cutting depth and diameter.
3. The boring diameter is 0.78"-1.06".
4. Connection mechanism is based on a simple design but assures strong face contact.
1. Accurate repeatability within 0.0012".
2. Free to assemble for required cutting depth and diameter.
3. Fit for Kilowood 21CD25-HBA20-60 & 21CD25-HBA27-50.
4. Connection mechanism is based on a simple design but assures strong face contact.
1. Made from alloy steel for excellent vibration control.
2. Inserts are not included but available (XC..1204..).
3. All critical surfaces precision ground.
4. Suitable for most face milling applications on steel, stainless steel, and cast iron.
1. Made from alloy steel for excellent vibration control.
2. Inserts are not included but available (XC..1204..).
3. All critical surfaces precision ground.
4. Suitable for most face milling applications on steel, stainless steel, and cast iron.
1. Made from alloy steel for excellent vibration control.
2. Inserts are not included but available (XC..1204..).
3. All critical surfaces precision ground.
4. Suitable for most face milling applications on steel, stainless steel, and cast iron.
1.Works on all BT40 machines
2.Coolant thru capability
3.All critical tool holder surfaces precision ground
4.Tool Holder is Balanced to G6.3 at 15,000 rpm
5.Concentricity is less than 0.0001" at collet face
1. Do turning, face grooving, facing, grooving, and cut-off applications with this one tool
2. One system with two cutting edges designed especially for increased speeds and feeds
3. Exceptionally fast cycle times with no turret indexes
4. Reduce machine set-up time and tooing inventory
1. Do turning, face grooving, facing, grooving, and cut-off applications with this one tool
2. One system with two cutting edges designed especially for increased speeds and feeds
3. Exceptionally fast cycle times with no turret indexes
4. Reduce machine set-up time and tooing inventory
1. Do turning, face grooving, facing, grooving, and cut-off applications with this one tool
2. One system with two cutting edges designed especially for increased speeds and feeds
3. Exceptionally fast cycle times with no turret indexes
4. Reduce machine set-up time and tooing inventory
1. Do turning, face grooving, facing, grooving, and cut-off applications with this one tool
2. One system with two cutting edges designed especially for increased speeds and feeds
3. Exceptionally fast cycle times with no turret indexes
4. Reduce machine set-up time and tooing inventory
1. Do turning, face grooving, facing, grooving, and cut-off applications with this one tool
2. One system with two cutting edges designed especially for increased speeds and feeds
3. Exceptionally fast cycle times with no turret indexes
4. Reduce machine set-up time and tooing inventory
1. Do turning, face grooving, facing, grooving, and cut-off applications with this one tool
2. One system with two cutting edges designed especially for increased speeds and feeds
3. Exceptionally fast cycle times with no turret indexes
4. Reduce machine set-up time and tooing inventory
1. WARRANTY: 1-YEAR
2. Overall Length: 6"
3. Model#: DCKNR 16-4D
4. Insert not included
1. WARRANTY: 1-YEAR
2. Overall Length: 6"
3. Model#: DCLNL 16-4D
4. Insert not included
1. WARRANTY: 1-YEAR
2. Overall Length: 6"
3. Model#: DCRNR 16-4D
4. Insert not included
1. WARRANTY: 1-YEAR
2. Overall Length: 12"
3. Model#: S16T-SDQCR-3
4. Insert not included
1. WARRANTY: 1-YEAR
2. Overall Length: 12"
3. Model#: S16T-STFCR-3
4. Insert not included
1. WARRANTY: 1-YEAR
2. Overall Length: 4"
3. Model#: SCLCL 08-2
4. Insert not included
1. WARRANTY: 1-YEAR
2. Overall Length: 4"
3. Model#: SCLCR 08-2
4. Insert not included
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.00059" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Accurate repeatability within 0.0012".
2. Free to assemble for required cutting depth.
3. Fit for Kilowood Modular Holder: 21A.CAT40.63-3543 and Boring Head: 21CD63-HBA69-90.
4. Connection mechanism is based on a simple design but assures strong face contact.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.00059" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.00059" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.00059" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. WARRANTY: 1-YEARS.
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.00059" at 4xD position.
6. Clamping Range: 0.0938"-0.0741", Overall Length: 0.708".
1. WARRANTY: 1-YEAR.
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.0003" at 4xD position.
6. Clamping Range: 0.1250"-0.0856", Overall Length: 1.24".
1. WARRANTY: 1-YEAR.
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.0003" at 4xD position.
6. Clamping Range: 0.3125"-0.2731", Overall Length: 1.24".
1. WARRANTY: 1-YEAR.
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.0003" at 4xD position.
6. Clamping Range: 0.3750"-0.3356", Overall Length: 1.24".
1. WARRANTY: 1-YEAR
2. Overall Length: 8"
3. Model#: S10R-SCLCR-3
4. Insert not included
1. WARRANTY: 1-YEAR
2. Overall Length: 10"
3. Model#: S12S-SCLCR-3
4. Insert not included
1. WARRANTY: 1-YEAR
2. Overall Length: 3"
4. Model#: A05F-SCLCR-2
5. Insert not included
1. WARRANTY: 1-YEAR
2. Overall Length: 4"
3. Model#: A06H-SCLCR-2
4. Insert not included
1. WARRANTY: 1-YEAR
2. Overall Length: 5"
3. Model#: A08K-SCLCR-2
4. Insert not included
1. WARRANTY: 1-YEAR.
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.0003" at 4xD position.
6. Clamping Range: 0.2500"-0.2106", Overall Length: 1.78".
1. WARRANTY: 1-YEAR.
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.0003" at 4xD position.
6. Clamping Range: 0.4375"-0.3981", Overall Length: 1.78".
1. WARRANTY: 1-YEAR
2. Made of special 65Mn alloy steel and hardened to HRC 46-50.
3. It can be widely used for boring,milling,dring and tapping operation.
4. All critical collet surfaces are precision ground for accurate fit.
5. Runout tolerance within 0.0003" at 4xD position.
6. Clamping Range: 0.5625"-0.5231", Overall Length: 1.78".
1. TIR: ≤0.0001" at collet face
2. Balanced: Up to G2.5 25,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all CAT40 machines
1. TIR: ≤0.0001" at collet face
2. Balanced: Up to G2.5 25,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all CAT40 machines
1. TIR: ≤0.0001" at collet face
2. Balanced: Up to G2.5 25,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all CAT40 machines
1. TIR: ≤0.0001" at collet face
2. Balanced: Up to G2.5 25,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all CAT40 machines
1. TIR: ≤0.0001" at collet face
2. Balanced: Up to G2.5 25,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all CAT40 machines
1. TIR: ≤0.0001" at collet face
2. Balanced: Up to G2.5 25,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all CAT40 machines
1. TIR: ≤0.0001" at collet face
2. Balanced: Up to G2.5 25,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all CAT40 machines
1. TIR: ≤0.0001" at collet face
2. Balanced: Up to G2.5 25,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all CAT40 machines
1. TIR: ≤0.0001" at collet face
2. Balanced: Up to G2.5 25,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all CAT40 machines
1. TIR: < 0.0001" at collet face
2. Balanced: Up to G2.5 25,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all CAT40 machines
1. TIR: ≤0.0001" at collet face
2. Balanced: Up to G2.5 25,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all CAT40 machines
1. TIR: ≤0.0001" at collet face
2. Balanced: Up to G2.5 15,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all CAT50 machines
1. TIR: ≤0.0001" at collet face
2. Balanced: Up to G2.5 15,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all CAT50 machines
1. TIR: ≤0.0001" at collet face
2. Balanced: Up to G2.5 15,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all CAT50 machines
1. TIR: ≤0.0001" at collet face
2. Balanced: Up to G2.5 15,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all CAT50 machines
1. TIR: ≤0.0001" at collet face
2. Balanced: Up to G2.5 15,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all CAT50 machines
1. TIR: ≤0.0001" at collet face
2. Balanced: Up to G2.5 15,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all CAT50 machines
1. TIR: ≤0.0001" at collet face
2. Balanced: Up to G2.5 25,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all BT30 machines
1. TIR: ≤0.0001" at collet face
2. Balanced: Up to G2.5 25,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all BT30 machines
1. TIR: ≤0.0001" at collet face
2. Balanced: Up to G2.5 25,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all BT40 machines
1. TIR: ≤0.0001" at collet face
2. Balanced: Up to G2.5 25,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all BT40 machines
1. TIR: ≤ 0.0001"
2. Balanced: Up to G2.5 25,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all BT40 machines
1. TIR: ≤0.0001" at collet face
2. Balanced: Up to G2.5 15,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all BT50 machines
1. TIR: ≤ 0.0001" at collet face
2. Balanced: Up to G2.5 15,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all BT50 machines
1. TIR: ≤ 0.0001" at collet face
2. Balanced: Up to G2.5 20,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all BT50 machines
1. TIR: ≤ 0.0001"
2. Balanced: Up to G2.5 15,000 rpm
3. Coolant-thru: thru-tool coolant
4. Works on all BT50 machines
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 20,000 rpms
3. Works on all CAT40 Machines
4. Through-spindle coolant capability
1. TIR: ≤0.0002"
2. Balanced to G6.3 at 10,000 rpms
3. Works on all CAT50 Machines
4. Through-spindle coolant capability
1. ≤TIR: 0.0001"
2. Balanced to G2.5 at 25,000 rpms
3. Works on all CAT40 Machines
4. Standard with AD coolant entry
1. TIR: ≤0.0001"
2. Balanced to G2.5 at 25,000 rpms
3. Works on all CAT40 Machines
4. Standard with AD coolant entry
1. TIR: ≤0.0001"
2. Balanced to G2.5 at 25,000 rpms
3. Works on all CAT40 Machines
4. Standard with AD coolant entry
1. TIR: ≤0.0001"
2. Balanced to G2.5 at 25,000 rpms
3. Works on all CAT40 Machines
4. Standard with AD coolant entry
1. TIR: ≤0.0001"
2. Balanced to G2.5 at 25,000 rpms
3. Works on all CAT40 Machines
4. Standard with AD coolant entry
1. TIR: 0.0001" or better
2. Balanced to G2.5 at 25,000 rpms
3. Works on all CAT40 Machines
4. Standard with AD coolant entry
1. Comes in a plastic collet box.
2. Full set covers all sizes from 0.0273" to 0.375".
3. Total runout less than 0.0003" on these precise ER16 collets.
4. The following sizes are included 3/64 1/16 3/32 1/8 3/16 7/32 1/4 5/16 11/32 3/8.
5. It can be widely used for boring, milling, drilling and tapping operation.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring,milling,drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Made of special 65Mn alloy steel and hardened to HRC 46-50.
2. It can be widely used for boring, milling, drilling and tapping operation.
3. All critical collet surfaces are precision ground for accurate fit.
4. Runout tolerance within 0.0003" at 4xd position.
1. Accurate repeatability within 0.0012".
2. Free to assemble for required cutting depth and diameter.
3. The boring diameter is 0.78"-1.06".
4. Connection mechanism is based on a simple design but assures strong face contact.
1. Accurate repeatability within 0.0012".
2. Free to assemble for required cutting depth and diameter.
3. The boring diameter is 0.78"-1.06".
4. Connection mechanism is based on a simple design but assures strong face contact.
1. Accurate repeatability within 0.0012".
2. Free to assemble for required cutting depth and diameter.
3. The boring diameter is 0.78"-1.06".
4. Connection mechanism is based on a simple design but assures strong face contact.
1. Accurate repeatability within 0.0012".
2. Free to assemble for required cutting depth and diameter.
3. The boring diameter is 2.72"-3.58".
4. Connection mechanism is based on a simple design but assures strong face contact.
1. Accurate repeatability within 0.0012".
2. Free to assemble for required cutting depth and diameter.
3. The boring diameter is 3.54"-4.80".
4. Connection mechanism is based on a simple design but assures strong face contact.