1. Hole size 11/16''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole size 1-1/16''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole size 3/32''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole size 3/64''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
Use with 250-100 tool post |
KNURNING & FACING HOLDER 250-110 |
Used on 250-100 tool post |
Use with 250-200 tool post |
KNURNING & FACING HOLDER 250-210 |
Used on 250-200 tool post |
Use with 250-300 tool post |
KNURNING & FACING HOLDER 250-310 |
Used on 250-300 tool post |
Use with 250-400 tool post |
KNURNING & FACING HOLDER 250-410 |
Used on 250-400 tool post |
1. Hole size: 3/8"
2. Length from Datum line to nose end : 2.5"
3. Material: 20CrMnTi
4. T.I.R.: 0.0002"
5. Ourside taper CAT40
6. To clamp tools with 3/8"shank.
1. Hole size: 1/2"
2. Length from Datum line to nose end : 2-5/8"
3. Material: 20CrMnTi
4. T.I.R.: 0.0002"
5. Ourside taper CAT40
6. To clamp tools with 1/2" shank.
1. Hole size: 5/8"
2. Length from Datum line to nose end : 3-3/4"
3. Material: 20CrMnTi
4. T.I.R.: 0.0002"
5. Ourside taper CAT40
6. To clamp tools with 5/8"shank.
1. Hole size: 7/8"
2. Length from Datum line to nose end : 4"
3. Material: 20CrMnTi
4. T.I.R.: 0.0002"
5. Ourside taper CAT40
6. To clamp tools with 7/8"shank.
1. Hole size: 1"
2. Length from Datum line to nose end : 4"
3. Material: 20CrMnTi
4. T.I.R.: 0.0002"
5. Ourside taper CAT40
6. To clamp tools with 1"shank.
1. Hole size: 1/2" |
2. Length from Datum line to nose end : 4-5/8" |
3. Material: 20CrMnTi |
4. T.I.R.: 0.0002" |
5. Ourside taper CAT50 |
6. To clamp tools with 1/2"shank. |
1. Hole size: 5/8" |
2. Length from Datum line to nose end : 3-3/4" |
3. Material: 20CrMnTi |
4. T.I.R.: 0.0002" |
5. Ourside taper CAT50 |
6. To clamp tools with 5/8"shank. |
1. Hole size: 3/4" |
2. Length from Datum line to nose end : 5-3/4" |
3. Material: 20CrMnTi |
4. T.I.R.: 0.0002" |
5. Ourside taper CAT50 |
6. To clamp tools with 3/4"shank. |
1. Hole size: 7/8" |
2. Length from Datum line to nose end : 5-3/4" |
3. Material: 20CrMnTi |
4. T.I.R.: 0.0002" |
5. Ourside taper CAT50 |
6. To clamp tools with 7/8"shank. |
1. Hole size: 1" |
2. Length from Datum line to nose end : 6" |
3. Material: 20CrMnTi |
4. T.I.R.: 0.0002" |
5. Ourside taper CAT50 |
6. To clamp tools with 1"shank. |
1. Hole size: 3/4" |
2. Length from Datum line to nose end : 1-3/8" |
3. Material: 20CrMnTi |
4. T.I.R.: 0.0002" |
5. Ourside taper CAT40 |
6. To clamp tools with 3/4"shank. |
1. Hole size: 1" |
2. Length from Datum line to nose end : 1/16" |
3. Material: 20CrMnTi |
4. T.I.R.: 0.0002" |
5. Ourside taper CAT40 |
6. To clamp tools with 1"shank. |
1. Hole size: 1-1/4" |
2. Length from Datum line to nose end : 2-1/8" |
3. Material: 20CrMnTi |
4. T.I.R.: 0.0002" |
5. Ourside taper CAT40 |
6. To clamp tools with 1-1/4"shank. |
1. Inside taper: Morse taper 4.
2. Length from Datum line to nose end : 3.55"
3. Material: 20CrMnTi
4. T.I.R.: 0.0002"
5. Ourside taper CAT40
6. For Morse taper 4 tools with tang.
1
1. Hardness: HRC40-45
2. Material: 45# steel
3. Black oxide surface
4. Collet nut diameter: 2.48"
5. Thread size: M50 x 1.5
Polishing and Buffing compound used for finishing and polishing with Multitool Attachment
Perfectly compliments 3M Talc polishing belts on all Multitool Attachments
1. Hole size: 3/4" |
2. Length from Datum line to nose end : 3 3/4" |
3. Material: 20CrMnTi |
4. T.I.R.: 0.0002" |
5. Ourside taper CAT40 |
6. To clamp tools with 3/4"shank. |
1. Hole size: 3/4" |
2. Length from Datum line to nose end : 2-1/2" |
3. Material: 20CrMnTi |
4. T.I.R.: 0.0002" |
5. Ourside taper CAT40 |
6. To clamp tools with 3/4"shank. |
1. Hole size 1''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole size 1-1/32''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole size 1-1/64''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole size 1-3/64''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole size 1-5/64''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole size 1-7/64''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole size 11/64''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole size 13/16''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole size 13/32''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole size 13/64''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole size 15/16''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole size 17/64''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole size 21/64''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole size 23/32''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole size 23/64''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole size 25/64''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole size 27/64''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole size 29/64''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole size 29/32''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole size 31/32''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole size 31/64''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole size 33/64''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole size 37/64''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole size 39/64''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole size 41/64''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole size 43/64''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole size 45/64''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole size 5/64''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole size 51/64''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole size 53/64''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole size 55/64''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole size 57/64''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole size 59/64''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole size 61/64''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole size 63/64''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole size 7/64''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole size 9/64''
2. Collet style: 5C Round
3. Material: 65Mn
4. T.I.R.: 0.0006"
5. Widely used on lathe machine with 5C spindle and fixtures 5C hole
1. Hole Diameter: 1/8", overall length is 1.811"
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.125"-0.085"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 1", overall length is 1.811"
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 1"-0.960"
4. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
5. Hardness: 46-50 HRC
1. Hole Diameter: 3/16", overall length is 1 - 13/16"
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.187"-0.148"
4. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
5. Hardness: 46-50 HRC
1. Hole Diameter: 1/4", overall length is 1.811"
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.250"-0.210"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 3/8", overall length is 1.811"
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.375"-0.335"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 5/16", overall length is 1 - 13/16"
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.312"-0.273"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 1/2", overall length is 1.811"
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.500"-0.460"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 7/16", overall length is 1.811"
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.437"-0.398"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 9/16", overall length is 1 - 13/16"
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.562"-0.522"
4..Hardness:46-50HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 7/8", overall length is 1.811"
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.875"-0.835"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 5/8", overall length is 1.811"
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.625"-0.585"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 3/4", overall length is 1.811"
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.750"-0.710"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 1/16", overall length is 1.811”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.0625“-0.0428”
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.00059"
1. Hole Diameter: 5/32", overall length is 1.811”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.156”-0.116”
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 1/16", overall length is 1.575”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.0625"-0.0428"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.00059"
1. Hole Diameter: 1/8", overall length is 1.575”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.125"-0.085"
4. Hardness: 46-50HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 5/32", overall length is 1.575”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.156”-0.116”
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 3/16", overall length is 1.575”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.187"-0.148"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.00059"
1. Hole Diameter: 1/4", overall length is 1.575”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.250"-0.210"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 5/16", overall length is 1.575”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.312"-0.273"
4. Hardness: 46-50HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 3/8", overall length is 1.575”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.375"-0.335"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 7/16", overall length is 1.575”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.437"-0.398"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 9/16", overall length is 1.575”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.562"-0.522"
4. Hardness: 46-50HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 5/8", overall length is 1.575"
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.625"-0.585"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 3/4", overall length is 1.575”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.750"-0.710"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 3/32", overall length is 1.575”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.0937”-0.0740”
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.00059"
1. Hole Diameter: 1/16", overall length is 1.338”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.0625"-0.0428"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.00059"
1. Hole Diameter: 1/8", overall length is 1.338”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.125"-0.085"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 5/32", overall length is 1.338”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.156”-0.116”
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 3/16", overall length is 1.338”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.187"-0.148"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 1/4", overall length is 1.338”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.250"-0.210"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 7/16", overall length is 1.338”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.437"-0.398"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 1/2", overall length is 1.338”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.500"-0.460"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 9/16", overall length is 1.338”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.562"-0.522"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 5/8", overall length is 1.338”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.625"-0.585"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 1/16", overall length is 1.240”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.0625"-0.0428"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.00059"
1. Hole Diameter: 3/32", overall length is 1.240”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.0937”-0.0740”
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.00059"
1. Hole Diameter: 1/8", overall length is 1.240”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.125"-0.085"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 5/32", overall length is 1.240”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.156”-0.116”
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 3/16", overall length is 1.240”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.187"-0.148"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 1/4", overall length is 1.240”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.250"-0.210"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 5/16", overall length is 1.240”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.312"-0.273"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 3/8", overall length is 1.240”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.375"-0.335"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 7/16", overall length is 1.240”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.437"-0.398"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 1/2", overall length is 1.240”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.500"-0.460"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 1/16", overall length is 1.082”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.0625"-0.0428"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.00059"
1. Hole Diameter: 3/32", overall length is 1.082”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.0937”-0.0740”
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.00059"
1. Hole Diameter: 1/8", overall length is 1.082”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.125"-0.085"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 5/32", overall length is 1.082”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.156”-0.116”
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 3/16", overall length is 1.082”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.187"-0.148"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 5/16", overall length is 1.082”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.312"-0.273"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 3/8", overall length is 1.082”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.375"-0.335"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 11/32", overall length is 1.082”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.343"-0.304"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 3/32", overall length is 0.708”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.0937”-0.0740”
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.00059"
1. Hole Diameter: 1/16", overall length is 0.708”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.0625"-0.0428"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.00059"
1. Hole Diameter: 1/8", overall length is 0.708”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.125"-0.085"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 5/32", overall length is 0.708”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.156”-0.116”
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 3/16", overall length is 0.708”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.187"-0.148"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
The oil tray for VM32L 8"x33" Mill Drill
1. Hole Diameter: 1/4", overall length is 0.708”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 0.250"-0.210"
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 3 mm ( 0.118" ), overall length is 1.811"
2. Clamping Range: 3-2 mm( 0.118"-0.078" )
3. Material: High Grade JIS-SUJ2
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 4mm(0.157“), overall length is 1.811"
2. Clamping Range: 4-3 mm ( 0.157"-0.118" )
3. Material: High Grade JIS-SUJ2
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 5 mm(0.196“), overall length is 1.811"
2. Clamping Range: 5-4 mm ( 0.196"-0.157" )
3. Material: High Grade JIS-SUJ2
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 6 mm(0.236“), overall length is 1.811"
2. Clamping Range: 6-5 mm ( 0.236"-0.196" )
3. Material: High Grade JIS-SUJ2
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 7 mm(0.275“), overall length is 1.811"
2. Clamping Range: 7-6 mm( 0.275"-0.236" )
3. Material: High Grade JIS-SUJ2
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 8 mm(0.314“), overall length is 1.811"
2. Clamping Range: 8-7 mm( 0.314"-0.275" )
3. Material: High Grade JIS-SUJ2
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 9 mm(0.354“), overall length is 1.811"
2. Clamping Range: 9-8 mm( 0.354"-0.314" )
3. Material: High Grade JIS-SUJ2
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 10mm(0.394“), overall length is 1.811"
2. Clamping Range: 10-9mm ( 0.394"-0.354")
3. Material: High Grade JIS-SUJ2
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 11mm(0.433“), overall length is 1.811"
2. Clamping Range: 11-10mm (0.433"-0.394")
3. Material: High Grade JIS-SUJ2
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 12mm(0.472“), overall length is 1.811"
2. Clamping Range: 12-11mm (0.472"-0.433")
3. Material: High Grade JIS-SUJ2
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 13mm(0.511“), overall length is 1.811"
2. Clamping Range: 13-12mm(0.511"-0.472")
3. Material: High Grade JIS-SUJ2
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 14mm(0.551“), overall length is 1.811"
2. Clamping Range: 14-13mm (0.551"-0.511")
3. Material: High Grade JIS-SUJ2
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 15mm(0.590“), overall length is 1.811"
2. Clamping Range: 15-14mm(0.590"-0.551")
3. Material: High Grade JIS-SUJ2
4. Hardness:46-50HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 16mm(0.629“), overall length is 1.811"
2. Clamping Range: 16-15mm (0.629"-0.590")
3. Material: High Grade JIS-SUJ2
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 17mm(0.669“), overall length is 1.811"
2. Clamping Range: 17-16mm (0.669"-0.629")
3. Material: High Grade JIS-SUJ2
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 18mm(0.708“), overall length is 1.811"
2. Clamping Range: 18-17mm (0.708"-0.669")
3. Material: High Grade JIS-SUJ2
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 19mm(0.748“), overall length is 1.811"
2. Clamping Range: 19-18mm (0.748"-0.708")
3. Material: High Grade JIS-SUJ2
4. Hardness:46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 20 mm(0.787“), overall length is 1.811"
2. Clamping Range: 20-19 mm ( 0.787"-0.748" )
3. Material: High Grade JIS-SUJ2
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 21 mm(0.826“), overall length is 1.811"
2. Clamping Range: 21-20 mm ( 0.826"-0.787" )
3. Material: High Grade JIS-SUJ2
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 22 mm(0.866“), overall length is 1.811"
2. Clamping Range: 22-21 mm ( 0.866"-0.826" )
3. Material: High Grade JIS-SUJ2
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 23 mm(0.905“), overall length is 1.811"
2. Clamping Range: 23-22 mm ( 0.905"-0.866" )
3. Material: High Grade JIS-SUJ2
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 24 mm(0.944“), overall length is 1.811"
2. Clamping Range: 24-23 mm( 0.944"-0.905" )
3. Material: High Grade JIS-SUJ2
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 25 mm(0.984“), overall length is 1.811"
2. Clamping Range: 25-24 mm ( 0.984"-0.944" )
3. Material: High Grade JIS-SUJ2
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 26 mm(1.023“), overall length is 1.811"
2. Clamping Range: 26-25 mm (1.023"-0.984")
3. Material: High Grade JIS-SUJ2
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 3mm(0.118"), overall length is 1.575”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 3-2mm(0.118"-0.078")
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 4mm (0.157"), overall length is 1.575”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 4-3mm (0.157"-0.118")
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 5mm(0.196"), overall length is 1.575”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 5-4mm(0.196"-0.157")
4. Hardness: 46-50HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 6mm (0.236"), overall length is 1.575”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 6-5mm (0.236"-0.196")
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 7mm (0.275"), overall length is 1.575”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 7-6mm (0.275"-0.236")
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 8mm (0.314"), overall length is 1.575”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 8-7mm (0.314"-0.275")
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 9mm (0.354"), overall length is 1.575”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 9-8mm (0.354"-0.314")
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 10mm (0.394"), overall length is 1.575”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 10-9mm (0.394"-0.354")
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 11mm (0.433"), overall length is 1.575”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 11-10mm (0.433"-0.394")
4. Hardness: 46-50HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 12mm (0.472"), overall length is 1.575”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 12-11mm (0.472"-0.433")
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 13mm (0.511"), overall length is 1.575”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 13-12mm (0.511"-0.472")
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 14mm (0.551"), overall length is 1.575”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 14-13mm (0.551"-0.511")
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"
1. Hole Diameter: 15mm (0.590"), overall length is 1.575”
2. Material: High Grade JIS-SUJ2
3. Clamping Range: 15-14mm (0.590"-0.551")
4. Hardness: 46-50 HRC
5. Good elasticity, high precision, Run-Out Tolerance ≤ 0.0003"