Metal Machine Tool Industry

1. Machine Taper: BT30

2. Angle Degree: 45 degrees

3. Thread: M12 × 1.75

4. Non coolant - thru

5. Overall Length: 1 - 11/16"

1. Machine Taper: BT40

2. Angle Degree: 45 degrees

3. Thread: M16 × 2

4. Non coolant - thru

5. Overall Length: 2 - 23/64"

1. TIR: ≤0.0002"
2. Balanced to G6.3 at 10,000 rpms
3. Works on all CAT50 Machines
4. Through-spindle coolant capability

1. TIR: ≤0.0002"
2. Balanced to G6.3 at 10,000 rpms
3. Works on all CAT50 Machines
4. Through-spindle coolant capability

1. TIR: ≤0.0002"
2. Balanced to G6.3 at 10,000 rpms
3. Works on all CAT50 Machines
4. Through-spindle coolant capability

Bolton Tools is known for manufacturing only top-notch metalworking machine tools including metal lathes, milling machines, CNC lathes, and more. The BT500-S is a stand and oil plate for Bolton Lathe BT500.

Bolton Tools is known for manufacturing only top-notch metalworking machine tools including metal lathes, milling machines, CNC lathes, and more. The BT800-S is a stand and oil plate for Bolton Lathe BT800.

1. Made of special 65Mn alloy steel and hardened to HRC 46-50.

2. It can be widely used for boring, milling, drilling and tapping operation.

3. All critical collet surfaces are precision ground for accurate fit.

4. Runout tolerance within 0.0003" at 4xd position.

1. Machine Taper: CAT40

2. Angle Degree: 45 degrees

3. Thread: 5/8" - 11

4. Coolant - thru

5. Overall Length: 1-1/2"

1. Machine Taper: CAT50

2. Angle Degree: 45 degrees

3. Thread: 1" - 8

4. Coolant - thru

5. Overall Length: 2-19/64"

1. Effective Cutting Range: 59" × 118" (1500mm × 3000mm)

2. Flame Cutting Gas: Oxygen + Acetylene / Propane

3. Max. Flame Cutting Thickness: 5-29/32" (150mm)

4. Max. Plasma Cutting Thickness: According to plasma cutmaster

5. 110V±10%, 60Hz, 0.21HP (160W)

6. Plasma cutmaster and plasma torch are not included in the package.

1. Has an internal thread of 22mm X 1.5 pitch

2. Balanced to 20000rpm at G2.5

3. Outside diameter is 1-7/64" (28mm)

4. Outside hex for tightening is 63/64"(25mm) across flats

5. ER16-Wrench works on this collet nut

1. ER25 Collet Nut has an internal thread of M32 X 1.5 pitch

2. Outside diameter is 1-21/32" (42mm)

3. ER25 Collet Nut holds all ER25 collets

4. ER25-Wrench works on this collet nut

5. Balanced to 20000rpm at G2.5

1. ER32 Collet Nut has an internal thread of M40 X 1.5 pitch

2. Outside diameter is 1-31/32" (50mm)

3. ER32 Collet Nut holds all ER32 collets

4. ER32-Wrench works on this collet nut

1. ER40 Collet Nut has an internal thread of M50 X 1.5 pitch

2. Outside diameter is 2-31/64" (63mm)

3. ER40 Collet Nut holds all ER40 collets

4. ER40-Wrench works on this collet nut

5. Balanced to 20000rpm at G2.5

1. ANSI Number: WNMG080404; ISO Number: WNMG431 

2. Material: Carbide

3. Used for Steel,

4.Coating Process:PVD

1. 80° rhombic insert;

2. ANSI Number: CCMT431; ISO Number: CCMT120404;

3. Material: Carbide;

4. Used for Steel, Stainless Steel, Hard Steel;

1. 80° rhombic insert;

2. ANSI Number: CCMT432; ISO Number: CCMT120408;

3. Material: Carbide;

4.Used for Steel, Stainless Steel, Hard Steel;

1. 80° rhombic insert;

2. ANSI Number: CCMT2152; ISO Number: CCMT060208;

3. Material: Carbide;

4. 4. Used for Steel;

1. 80° rhombic insert;

2.Quantity:10pcs

3.Used for Aluminum;

4. ANSI Number:CCGT2152; ISO Number:CCGT060208;

5. Material: Carbide

1. 80° rhombic insert;

2. ANSI Number: CCGT3252; ISO Number: CCGT09T308;

3. Material: Carbide;

4. Used for Aluminum;

1. 55° rhombic insert;

2. ANSI Number: DCGT3252; ISO Number: DCGT11T308;

3. Material: Carbide;

4. Used for Aluminum;

1. 60° rhombic insert;

2. ANSI Number: TCMT2151; ISO Number: TCMT110204;

3. Material: Carbide;

4. Used for Steel;

1. 60° rhombic insert;

2. ANSI Number: TCGT2152; ISO Number: TCGT110208;

3. Material: Carbide;

4. Used for Aluminum;

1. 60° rhombic insert;

2. ANSI Number: TCGT32505; ISO Number: TCGT16T302;

3. Material: Carbide;

4. Used for Aluminum;

1. 60° rhombic insert;

2. ANSI Number: TCGT3251; ISO Number: TCGT16T304;

3. Material: Carbide;

4. Used for Aluminum;

1. ISO Number: SPMG200;

2. Material: Carbide;

3. Used for Steel;

1. ISO Number: SPMG300;

2. Material: Carbide;

3. Used for Steel;

1. ISO Number: SPMG400;

2. Material: Carbide;

3. Used for Steel;

1. ISO Number: MGMN400T;

2. Material: Carbide;

3. Used for Steel;stainsteel;

1. 55° rhombic insert;

2. ANSI Number: TDC5;

3. Material: Carbide;

4. Used for Steel;stainless steel;

1. ANSI Number: TCMT3252; ISO Number: TCGT16T308-NL

2. Material: Carbide

3. Used for Aluminum 

4.Coating Process:PVD

1. Pole size 1-31/32"
2. Avg. Max. holding power: 227.5psi (16kg/cm2)
3. Voltage: 220V 60Hz 3ph
4. Parallelism: 0.002mm/100mm
5. Output Max Current: 50A

• 90 Degree Attachment for the XT-3000 and XT-3000 Auto
  

• Large Drill Attachment for the XT-3000 and XT-3000 Auto. Sharpens drills from 21mm to 30mm (13/16” – 1 3/16”).
  

• Duty Rating: Standard duty, intermittent use
• Grit Removal System: Optional vacuum
• Cutting Tool Diameter: 1/8"–3/4" (3–19 mm)

• V-390 WHEEL DIAMOND 180
  

• V-390 1/8-3/4 MORSE TAPER CHUCK
  

• • Acceptable drill diameter: 3mm (.118, 1/8inch) - 21 mm (.826, 13/16 inch)
  • Acceptable drill length: Unlimited maximum, two inch minimum.
  • Duty Rating: Heavy duty

• • Acceptable drill diameter: 3mm (.118, 1/8inch) - 21 mm (.826, 13/16 inch)
  • Acceptable drill length: Unlimited maximum, two inch minimum.
  • Duty Rating: Heavy duty

• 180 Grit CBN (Borazon) Sharpening Wheel for the XT-3000 and XT-3000 Auto.
  

• GRIND WHEEL 180 GRIT DIAMOND

• POINT SPLIT WHEEL 100 GRIT CBN
  

• POINT SPLIT WHEEL 260 GRIT DIAMOND
  

• Complete Vacuum Assembly for 115V sharpeners only.
  

• Aluminum sharpener stand only. Vacuum, Sharpeners and Accessories sold separately.
  

• XY Table (LEX100) Required with these attachments:

  • LEX150

  • LEX200 

  • LEX250

• Countersink Attachment for the XT-3000 and the XT-3000 Auto

• Brad Point Attachment for the XT-3000 and XT-3000 Auto
  

• Step Drill Attachment for the XT-3000 and XT-3000 Auto
  

BS912GR Metal Horizontal Cutting Bandsaw Transformer - BS912GR001

- Integrated safety strap and lifting shackle

- Easy controls

- Sturdy fixings

- Morse Taper 4 spindle

- Mechanical gear overload protection

Anti-Static Construction

3/4" Weldon shank standard

1-9/16" Countersink

2200 lbs. of Magnetic Force

3/4" Weldon shank standard

Magnet footprint: 8-11/16"x 4-5/16"x2-1/2"

6600 lbs. of Magnetic Force

Stroke 10-1/4"

3/4" Weldon shank standard

Magnet footprint: 6-5/16x3-1/8"x1-5/8"

3750 lbs. of Magnetic Force

Stroke 9-1/16"

3/4" Weldon shank standard

Magnet footprint: 6-11/16 x 3-3/8" x 1-7/8"

1895 lbs. of Magnetic Force

Stroke 6-11/16"

15.5 Amp Motor

Magnet footprint: 8-11/16"x 4-5/16"x2-1/2"

6600 lbs. of Magnetic Force

Stroke 10-1/4"

3/4" Weldon shank standard

14.5 Amp Motor

1895 lbs. of Magnetic Force

Stroke 6-11/16"

3/4" Weldon shank standard

Magnet footprint: 6-11/16 x 3-3/8" x 1-7/8"

4100 lbs. of Magnetic Force

Stroke 6-11/16"

Sharpens cutters 1/2"-3-15/16" diameter

Sharpens cutters 4" depth of cut

Laser guided adjustment

For HSS and Carbide cutters

3/4" Weldon shank standard

11.4 Amp Motor

Magnet footprint: 6-11/16 x 3-3/8" x 1-7/8"

4075 lbs. of Magnetic Force

Stroke 6-11/16"

3/4" Weldon shank standard

14.5 Amp Motor

Magnet footprint: 6-11/16 x 3-3/8" x 1-7/8"

4100 lbs. of Magnetic Force

Stroke 6-11/16"

3/4" Weldon shank standard

11.4 Amp Motor

Magnet footprint: 6-5/16"x3-1/8"x1-7/16"

4075 lbs. of Magnetic Force

Stroke 6-11/16"

2" Annular Cutter Capacity with 15/16" twist dril

3/4" Weldon shank standard

9.5 Amp Motor

Magnet footprint: 6-5/16"x3-1/8"x1-7/16"

3300 lbs. of Magnetic Force

Stroke 5-11/16"

3/4" Weldon shank standard

10.5 Amp Motor

Magnet footprint: 6-5/16"x3-1/8"x1-7/16"

3300 lbs. of Magnetic Force

Stroke 5-11/16"

3/4" Weldon shank standard

9.1 Amp Motor

Perfect for in shop or field

1173 lbs. of Magnetic Force

Stroke 3-9/16"

3/4" Weldon shank standard

8.2 Amp Motor

Magnet footprint: 6-5/16"x3-1/8"x1-7/16"

2650 lbs. of Magnetic Force

Stroke 3-9/16"

Integrated oil bath gearbox
Morse Taper 3 spindle
Practical long stroke
2-speed gearbox

Made in Taiwan

1. Chemical Data : Co(%):9/WC incl.Doping(%):91
2. Density ISO 3369 (g/cm3) : 14.3
3. Hardness HV30 ISO 3878 : 2000
4. Hardness HRA ISO 3778 : 94.1
5. Transverse Rupture Strength (N/mm2) : >4000
6. Transverse Rupture Strength (1000 psi) : >565
7. Microstructure : 0.2
8. ISO-Range:  K10~K30
9. Work Material : Carbon fiber-reinforced material, Hardened steel, Titanium alloys, Graphite composite materials, Fiberglass-reinforced material

Made in Taiwan

1. Chemical Data : Co(%):12/WC incl.Doping(%):88
2. Density ISO 3369 (g/cm3) : 14.1
3. Hardness HV30 ISO 3878 : 1680
4. Hardness HRA ISO 3778 : 92.3
5. Transverse Rupture Strength (N/mm2) : >3800
6. Transverse Rupture Strength (1000 psi) : >551
7. Microstructure : 0.5
8. ISO-Range:  K40~K50
9. Work Material :  Stainless steel, Titanium alloys, Non Ferrous metals, Corrosion and Heat resistant steels

Made in Taiwan

1. Chemical Data : Co(%):12/WC incl.Doping(%):88
2. Density ISO 3369 (g/cm3) : 14.1
3. Hardness HV30 ISO 3878 : 1680
4. Hardness HRA ISO 3778 : 92.3
5. Transverse Rupture Strength (N/mm2) : >3800
6. Transverse Rupture Strength (1000 psi) : >551
7. Microstructure : 0.5
8. ISO-Range:  K40~K50
9. Work Material :  Stainless steel, Titanium alloys, Non Ferrous metals, Corrosion and Heat resistant steels

Made in Taiwan

1. Chemical Data : Co(%):12/WC incl.Doping(%):88
2. Density ISO 3369 (g/cm3) : 14.1
3. Hardness HV30 ISO 3878 : 1680
4. Hardness HRA ISO 3778 : 92.3
5. Transverse Rupture Strength (N/mm2) : >3800
6. Transverse Rupture Strength (1000 psi) : >551
7. Microstructure : 0.5
8. ISO-Range:  K40~K50
9. Work Material :  Stainless steel, Titanium alloys, Non Ferrous metals, Corrosion and Heat resistant steels

1. It reduces tramp oil concentration in the coolant by 40% in an hour.

2. Coolant properties like cooling, rust prevention, ph value etc remain intact hence avoiding total replacement and disposal.

3. The system is portable and hence can be used for multiple machine tanks on the shopfloor.

4. The process of separation is mechanical i.e. there is no chemical reaction involved. Hence, the media is not consumed and hence does not need to be replaced.

5.Due to continuous pumping, the coolant is circulated and does not remain stagnant. This provides aeration and hence avoids bacterial growth leading to elimination of foul smell and chances of dermatitis.

6. There is no skill required in operating the unit. The design enables for plug in and forget about it operation.

Made in Italy

IMS Part code: CAT40026X3.0

Made in Italy

IMS Part code: CAT40027X2.76

Made in Italy

IMS Part code: CAT40027X3.0

Made in Italy

IMS Part code: CAT40027X4.0

Made in Italy

IMS Part code: CAT40028X2.76

Made in Italy

IMS Part code: CAT40028X3.0

Made in Italy

IMS Part code: CAT40303X3.0

Made in Italy

IMS Part code: CAT40305X3.0

Made in Italy

IMS Part code: CAT40307X3.0

Made in Italy

IMS Part code: CAT40309X3.0

Made in Italy

IMS Part code: CAT40207X3.0

Made in Italy

IMS Part code: CAT40209X3.0