1. Mount type: threaded mount
2. Runout: 0.004" TIR
3. Clamping range: 1/32" - 1/2"
4. Chuck key included
1. Jaw width: 3-15/16"; Jaw Height: 1-3/16"; Jaw Opening: 4"
2. Slots for easy clamping to tables
3. Feed screws have precision cut Acme threads
4. Accurate positioning in two directions (crossed)
1. R8 Shank, 33 Jacobs Taper
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. Hole diameter: 1" (25.4mm), overall length is 4" (101.6mm)
2. High grade collet steel
3. Drawbar thread: 7/16" - 20
4. Good elasticity, high precision, run-out tolerance 0.0012"
1. Arbor diameter: 1", H5 pilot tolerance
2. Rear thread for pull stud is 7/16" - 20
3. Gage length is 3.00"
4. Concentricity is less than 0.00031 at face and arbor
5. Width of removable drive keys are 3/8"
6. Hardened and precision taper ground to AT3 accuracy
1. Threaded mount: 1-1/2" - 18 TPI
2. Shank thread 7/16" - 20
3. R8 taper shank
4. Made of high grade alloy steel
1. Size MT2 × JT6
2. Hardened and precision ground
3. Made of high grade alloy steel
4. Total indicated runout is from 0.00059" to 0.00079"
1. For deep hole machining
2. Shank is 1" diameter 2-1/32" long
3. All critical tool holder surfaces precision ground
4. Made from alloy steel hardened to HRC48 - 52
5. This tool holder accepts all ER32 collets
6. Coolant through capability
1. Threaded Mount: 1-1/2" - 18 TPI
2. Maximum offset is 1" and minimum graduation is 0.0005"
3. Boring head O.D. size is 3", boring bar diameter is 3/4", Includes adjusting wrenches
4. Wide bearing surface assures maximum rigidity
1. Hole diameter 3/8", H5 Hole Tolorance
2. Runout: ≤ 0.00012“ TIR and through-spindle coolant capability
3. Rear thread for pull stud is1/2"-13
4. Fit for Drilling Machine, Milling Machine CNC Chuck or Holder
1. Mount type: 3/8" - 24 UNF thread mounted
2. Runout: 0.004" TIR
3. Clamping range: 1/32" - 3/8"
4. Chuck key included
1. Jaw width: 2 - 1/2", Jaw Height: 1 - 1/4", Jaw opening: 2 - 1/2", Anvil work-surface 1.65"x 1.26"
2. Manufactured From Die Cast Iron
3. Feed screws have precision cut acme threads
4. 360° Locking Swivel Base and large ground anvil
Bolton Tools is known for manufacturing only top-notch metalworking machine tools including metal lathes, milling machines, CNC lathes, and more. The BT24L CNC milling machine by Bolton Tools comes with a GSK CNC Control that is packed with features.
1. Table Dia. : 5-29/32" (150mm), Gear Ratio: 90:1
2. Dia. of Center Hole: 43/64" (17mm), Center Taper: MT2
3. Height of Center for Vert. mounting: 3-15/16" (100mm)
4. Number of T-Slots: 4, Width of T - Slot: 15/32" (12mm)
1. Table Dia.: 11 - 13/16" (300mm), Gear Ratio: 90 : 1
2. Dia. of Center Hole: 1 - 7/64" (28mm), Center Taper MT4
3. Height of center for Vert. mounting: 7 - 43/64" (195mm)
4. Number of T - Slots: 6, Width of T - Slot: 35/64" (14mm)
1. Runout: ≤ 0.00024" TIR
2. Through-spindle coolant capability
3. Precision balanced to G6.3 @ 10000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. Runout: ≤ 0.0002" TIR
2. Through-spindle coolant capability
3. Precision balanced to G2.5 @ 20000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. Runout: ≤ 0.00024" TIR
2. Through-spindle coolant capability
3. Precision balanced to G6.3 @ 10000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. Runout: ≤ 0.0002" TIR
2. Through-spindle coolant capability
3. Precision balanced to G2.5 @ 20000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. Runout: ≤ 0.00024'' TIR
2. Through-spindle coolant capability
3. Precision balanced to G6.3 @ 10000 rpm
4. Hardened and precision taper ground to AT3 accuracy
1. T.I.R. ≤ 0.00024" at collet face
2. Rear thread for pull stud is 5/8" - 11
3. Balanced to G6.3 at 10000 rpm
4. Works on all CAT40 machines
1. T.I.R. ≤ 0.0002" at collet face
2. Rear thread for pull stud is 5/8" - 11
3. Balanced to G6.3 at 15000 rpm
4. Works on all CAT40 machines
1. T.I.R. ≤ 0.0002" at collet face
2. Rear thread for pull stud is 5/8" - 11
3. Balanced to G6.3 at 15000 rpm
4. Works on all CAT40 machines
1. T.I.R. ≤ 0.00024" at collet face
2. Rear thread for pull stud is 1" - 8
3. Balanced to G6.3 at 10000 rpm
4. Works on all CAT 50 machines
1. T.I.R. ≤ 0.00031" at collet face
2. Rear thread for pull stud is 1" - 8
3. Balanced to G6.3 at 10000 rpm
4. Works on all CAT 50 machines
1. For deep hole machining
2. Shank is 5/8" diameter 3-21/32" long
3. All critical tool holder surfaces precision ground
4. Made from alloy steel hardened to HRC48 - 52
5. This tool holder accepts all ER16 collets
6. Coolant through capability
1. For deep hole machining
2. Shank is 3/4" diameter 6" long
3. All critical tool holder surfaces precision ground
4. Made from alloy steel hardened to HRC48 - 52
5. This tool holder accepts all ER20 collets
1. Table Diameter : 4-21/64" (110mm), Gear Ratio: 72:1
2. Diameter of Center Hole: 5/8" (16mm), Center Taper MT2
3. Height of center for Vert. mounting: 3-11/32" (85mm)
4. Number of T - Slot: 4, Width of T-Slot: 15/32" (12mm)
1. Runout: ≤ 0.00024" TIR.
2. Pilot Diameter: 1 - 1/2", H5 pilot tolerance
3. Rear thread for pull stud is 5/8"-11
4. Meets or exceeds ANSI specifications
No return,no refund after purchase
1. Runout: ≤ 0.0002" TIR
2. Pilot Diameter: 1-1/4", H5 arbor tolerance
3. Rear thread for pull stud is 5/8"-11
4. Meets or exceeds ANSI specifications
1. Runout: ≤ 0.0002" TIR.
2. Pilot Diameter: 1 - 1/4", H5 pilot tolerance
3. Rear thread for pull stud is M16
4. Hardened and precision taper ground to AT3 accuracy
1. Arbor diameter: 1-1/2", H5 pilot tolerance
2. Rear thread for pull stud is 7/16" - 20
3. Gage length is 5.00"
4. Concentricity is less than 0.00031 at face and arbor
5. Width of removable drive keys are 5/8"
6. Hardened and precision taper ground to AT3 accuracy
1. Hole diameter 3/8", H5 Hole Tolorance
2. Runout: ≤ 0.0002" TIR
3. Rear thread for pull stud is 5/8"-11
4. Fit for Drilling Machine, Milling Machine CNC Chuck or Holder
1. Hole diameter 7/16", H5 Hole Tolorance
2. Runout ≤ 0.00024"
3. Rear thread for pull stud is 1" - 8
4. Works on all CAT 50 machines
1. Hole diameter 5/8", H5 Hole Tolorance
2. Runout: ≤ 0.00012" TIR
3. Rear thread for pull stud is M12
4. Fit for Drilling Machine, Milling Machine CNC Chuck or Holder
1. Hole diameter 1/2", H5 Hole Tolorance
2. Runout: ≤ 0.0002" TIR
3. Rear thread for pull stud is M16
4. Fit for Drilling Machine, Milling Machine CNC Chuck or Holder
1. Hole diameter 1", H5 Hole Tolorance
2. Runout: ≤ 0.0002" TIR
3. Rear thread for pull stud is M16
4. Fit for Drilling Machine, Milling Machine CNC Chuck or Holder
1. Hole diameter 1/2", H5 Hole Tolorance
2. Runout: ≤ 0.00012 TIR and through-spindle coolant capability
3. Rear thread for pull stud is 1/2"-13
4. Fit for Drilling Machine, Milling Machine CNC Chuck or Holder
1. CAT50 outside taper, 2MT inside taper
2. Runout: 0.00031" TIR
3. Drawbar thread size1"-8
4. Precision ground for improved tool life and work piece consistency
1. 0.00031" TIR or better ensure the best possible cutting tool life
2. Hole diameter 3/4", H5 hole tolorance
3. Drawbar thread: 7/16" - 20
4. Fit for drilling machine, milling machine CNC chuck or holder
1. Hole diameter 1-1/4", H5 hole tolorance
2. 0.00031" TIR or better ensure the best possible cutting tool life
3. Drawbar thread: 7/16" - 20
4. Fit for drilling machine, milling machine CNC chuck or holder
1. Hole diameter : 13/32", overall length is 1-5/64" (27mm)
2. Material: High-Grade 65Mn
3. Clamping Range: 3/8" - 13/32"(0.375" - 0.406")
4. Good elasticity, high precision, runout tolerance 0.00059"
1. Hole Diameter : 11/32", overall length is 1 - 15/64"
2. Material:High Grade 65Mn
3. Clamping Range: 21/64"-11/32"(0.328"-0.349")
4. Good elasticity, high precision, Run-Out Tolerance 0.00059"
No return,no refund after purchase
1. Hole diameter : 9/32", overall length1-15/64"
2. Material: High-Grade 65Mn
3. Clamping Range: 1/4" - 9/32''(0.25" - 0.281")
4. Good elasticity, high precision, runOut tolerance 0.00059"
1.Hole Diameter: 17/32", overall length is 1 - 11/32"
2.Material: High Grade 65Mn
3.Clamping Range: 3/64" - 17/32"(0.516" - 0.531")
4.Good elasticity, high precision, Run-Out Tolerance ≤ 0.00059"