2. Excellent quality & Durability
3. Able to hold multiple different workpieces
4. Widely used in the fields of machining and processing
1. Jaw Opening: 110mm (4-21/64") ; Jaw Height: 29mm (1-9/64")
2. Parallel and accurate within 0.01mm/100mm (0.00039"/4"), squareness and accurate within 0.01mm/100mm (0.00039"/4")
3. Full 360° swivel base with graduation
4. Each pound of force in horizontal induces 1/2 lbs. of downward force, eliminating jaw tilt
1. Sliding surface of the vise bed is flame hardened and ground
2. Jaw Opening: 160mm (6-19/64") ; Jaw Height: 48mm (1-57/64")
3. Parallel and accurate within 0.01mm/100mm (0.00039" /4"), squareness and accurate
within 0.01mm/100mm (0.00039"/4")
4. Each pound of force in horizontal induces 1/2 lbs. of downward force, eliminating jaw tilt
1. Jaw width: 6"; Jaw Height: 2"
2. Jaw opening: 5"; Width of locating key: 11/16"
3. Easily accessible tilt and swivel clamps secure for positively worry-free operation
4. Use highest quality ductile Iron for minimum bending
1. Jaw Opening: 75mm (2-61/64") ; Jaw Height: 25mm (63/64")
2. Parallel and accurate within 0.01mm/100mm (0.00039" /4") , Squareness and accurate within 0.01mm/100mm (0.00039"/4")
3. Full 360° swivel base with graduation included
4. Each pound of force in horizontal induces 1/2 lbs. of downward force, eliminating jaw tilt
1. Jaw Width: 7- 7/8"; Jaw Height: 2 - 5/64"; Jaw Opening: 8"
2. Slots for easy clamping to tables
3. Feed screws have precision cut Acme threads
4. Accurate positioning in two directions (crossed)
1. Jaw width: 5 -29/32", jaw height: 1 - 3/16", jaw opening: 5-19/32"
2. Slots for easy clamping to tables
3. Ground base and Vice bed for extreme accuracy
4. Fixed Jaw is grooved Horizontally and Vertically for convenience in holding round pieces
1. +/- 0.0002" in Parallelism
2. Each parallel is 1/32" x 6" with 2 holes
3. Hardened and precision ground to HRC52 - 58
4. Includes 20 pairs of the following heights: 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8", 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1-1/2", 1-9/16", 1-5/8" &1-11/16"
1. Made of high quality casting steel for long life and increased durability
2. Made of high-grade steel and all the blocks, bolts, nuts and hold-downs are case hardened
3. T - Slot size: 13/16", Stud size: 5/8" - 11, 1-1/16" step block width
4. Includes 24 Studs 4 of each- 3", 4", 5", 6", 7", 8", 12 step blocks, 6 T - nuts, 6 flange nuts, 4 coupling nuts, 6 step clamp
1. Jaw width: 2 - 1/2", Jaw Height: 1 - 1/4", Jaw opening: 2 - 1/2", Anvil work-surface 1.65"x 1.26"
2. Manufactured From Die Cast Iron
3. Feed screws have precision cut acme threads
4. 360° Locking Swivel Base and large ground anvil
1. Jaw width: 4"; jaw height: 1-5/8"
2. Jaw opening: 3-3/16"; width of locating key: 9/16"
3. Easily accessible tilt and swivel clamps secure for positively worry-free operation
4. Use highest quality ductile Iron for minimum bending
1. Jaw width: 5" ; jaw height: 1-3/4"
2. Jaw opening: 4''; width of locating key: 11/16"
3. Easily accessible tilt and swivel clamps secure for positively worry-free operation
4. Use highest quality ductile Iron for minimum bending
1. Sliding surface of the vise bed is flame hardened and ground
2. Jaw Opening: 218mm (8-5/8") ; Jaw Height: 60mm (2-23/64")
3. Parallel and accurate within 0.01mm/100mm (0.00039" /4") , squareness and accurate within 0.01mm/100mm (0.00039"/4")
4. Each pound of force in horizontal induces 1/2 lbs of downward force, eliminating jaw tilt
1. Base height: 1-49/64"(45mm)
2. Precision ground and hardened
3. Use highest quality Ductile Iron
4. Rotation axis is included
1. Jaw width: 3" ; Jaw Height: 63/64"; Jaw opening: 2 - 61/64"
2. Horizontal swivel through 360°
3. The vise tilts 45° vertically
4. Easily accessible tilt and swivel clamps secure
1. Jaw width: 2-61/64", Jaw Height: 1-3/8", Jaw opening: 3"
2. Slots for easy clamping to tables
3. Feed screws have precision cut Acme threads
4. Accurate positioning in two directions (crossed)
1. Jaw width: 3-15/16"; Jaw Height: 1-3/16"; Jaw Opening: 4"
2. Slots for easy clamping to tables
3. Feed screws have precision cut Acme threads
4. Accurate positioning in two directions (crossed)
1. Jaw Width: 4-59/64", Jaw Height: 1-31/32", Jaw Opening: 5"
2. Slots for easy clamping to tables
3. Feed screws have precision cut Acme threads
4. Accurate positioning in two directions (crossed)
1. Jaw Width: 6-19/64"; Jaw Height: 2-5/64"; Jaw Opening: 6"
2. Slots for easy clamping to tables
3. Feed screws have precision cut Acme threads
4. Accurate positioning in two directions (crossed)
1. Jaw width: 3 - 11/32", Jaw Height: 1 - 1/16", Jaw opening: 2 - 3/4"
2. Slots for easy clamping to tables, the distance betwteen mounting slots is 4-3/32"
3. Ground base and Vice bed for extreme accuracy
4. Fixed Jaw is grooved Horizontally and Vertically for convenience in holding round pieces
1. Jaw width: 3 - 15/16", Jaw Height: 1 - 3/16", Jaw opening: 4"
2. Slots for easy clamping to tables
3. Ground base and Vice bed for extreme accuracy
4. Fixed Jaw is grooved Horizontally and Vertically for convenience in holding round pieces
1. Jaw width: 3-15/16", jaw height: 1-3/16", jaw opening: 4-23/32"
2. Slots for easy clamping to tables
3. Ground base and Vice bed for extreme accuracy
4. Fixed Jaw is grooved Horizontally and Vertically for convenience in holding round pieces
1. Jaw width: 2-1/2", jaw height: 1-1/4", maximum jaw opening: 2-1/2"
2. Anvil Work-Surface 1.65"x 1.26"
3. Made of Cast Iron
4. 360 ° Rotating head for clamping at any angle
5. Large anvil allows for flat shaping
6. Hardened steel replaceable jaws
1. Width of Jaw: 4"
2. Max Opening of Jaw: 3-9/16"
3. Height of Jaw: 1-3/8"
4. Adjustable gibs & steel jaws
1. Width of jaw opening: 6-5/16"
2. Height of jaw: 1-3/4"
3. 6520 lbs. of clamping force
4. Ultra precise in flatness, parallelism and verticality
5. Flame hardened vise bed and jaws
1. Material: High quality Steel (#20 CrMnTi)
2. Hardness: Carburized to wsurface hardness: HRC58-62
3. Accuracy: Parallelism 0.0002'' /3.94'', squareness 0.0002''
1. Material: High quality Steel (#20 CrMnTi)
2. Hardness: Carburized to wsurface hardness: HRC58-62
3. Accuracy: Parallelism 0.005mm /100mm, squareness 0.005mm
1 made fo high-quality alloy steel.the hardness of working surface reaches HRC58~62
2 parallelism 0.005mm/100mm
3 quickly to clamp and easy to operate
4 used for precision measurement and in spection precision grinding EDM and wire-cutting machine
5 Guarantee high accuracy in any position
1. High-quality alloy steel
2. Parallelism 0.005mm/100mm
3. Quickly to clamp and easy to operate
4. Guarantee high accuracy in any position
1. High-quality alloy steel
2. Parallelism 0.005mm/100mm
3. Quickly to clamp and easy to operate
4. Guarantee high accuracy in any position
1. High-quality alloy steel
2. Parallelism 0.005mm/100mm
3. Quickly to clamp and easy to operate
4. Hardness of working surface reaches HRC58~62
5. Guarantee high accuracy in any position
Made in Taiwan
1. Accurate machine & assembling.
2. Accurate parallelism & squareness in both ways.
3. Replaceable steel jaws.
4. This vise can be set at any place on the machine table and to drill multiple hotels accurately on the X-Y axis. Suitable for clamping soft materials such as wood, aluminum, copper-etc.
5. Made of high tensile casting FC25.
6. Suitable for clamping soft materials such as wood, aluminum, copper-etc.
Made in Taiwan
Made in Taiwan
1. Made of Strong FC25 the high tensile casting, stress relieved, highly stable, good wear-out resistant.
2. Easy clamping with models and gears.
3. Variety of clamping according to types machining and gears.
Made in Taiwan
1. Made of high tensile casting FC25.
2. Sliding rounded bar design make the griping rapid and precise.
3. Great stiffness machine center processed high accuracy for professional industrial use.
1. Made of high tensile casting FC25. |
2. It allows side lay applicable. |
3. Sliding rounded bar design make the griping rapid and precise. |
4. L-step jaw set clamps workpiece firmly vertical sides of the body are perpendicular to the jaws. |
5. Recessed jaw plates for convenient leveling of the workpiece. |
Made in Taiwan
1. Made of high tensile casting FC25.
2. Sliding rounded bar design make the griping rapid and precise.
3. L-step jaw set clamps workpiece firmly vertical sides of the body are perpendicular to the jaws.
4. It allows side lay applicable.
5. Recessed jaw plates for convenient leveling of the workpiece.
Made in Taiwan
1. Made of FC25 the high tensile casting.
2. Sliding rounded bar design make the griping rapid and precise.
3. L-step jaw set clamps workpiece firmly vertical sides of the body are perpendicular to the jaws.
4. It allows side lay applicable.
5. Recessed jaw plates for convenient leveling of the workpiece.
Made in Taiwan
1. The central sliding bar makes the movable jaw more workable.
2. Four bolt lugs for rigid mounting to the machine table.
3. Suitable for drill press use.
4. Replaceable steel jaws.
5. Central sliding bar type solved the movable jaw frequent loss problem and brought the clamping accuracy to a high level.
Made in Taiwan
1. The central sliding bar makes the movable jaw more workable.
2. Four bolt lugs for rigid mounting to the machine table.
3. Suitable for drill press use.
4. Replaceable steel jaws.
5. Central sliding bar type solved the movable jaw frequent loss problem and brought the clamping accuracy to a high level.
Made in Taiwan
1. The central sliding bar makes the movable jaw more workable.
2. Four bolt lugs for rigid mounting to the machine table.
3. Suitable for drill press use.
4. Replaceable steel jaws.
5. Central sliding bar type solved the movable jaw frequent loss problem and brought the clamping accuracy to a high level.
6. Made of the high tensile casting FC25.
1. Made of the high tensile casting FC25 |
2. Different sand position. |
3. Stress relieved abrasion, high strength, and resistance. |
4. High accurate in parallel and vertical suitable for a variety of machine workpiece clamping. |
1. Made of the high tensile casting FC25 |
2. Different sand position. |
3. Stress relieved abrasion, high strength, and resistance. |
4. High accurate in parallel and vertical suitable for a variety of machine workpiece clamping. |