1. High-speed rotation by the air drive!
2. Light load cutter structure by positive-type chip, lightweight (2 kg) handy type effortlessly chamfer.
3. Max chamfer ability from the yarn surface to the C4.
4. Adjustable chamfer angle: 45°(max).
5. Chamferred materials: soft iron, stainless steel or other metal.
1. 1.5 hp motor
2. 110-volt single-phase power.
3. Max. Chamfered width 0.275"
4. Adjustable bevel angle: 15°, 30 °, 45°.
5. 5-blade cutting tools provide a smooth finish
6. 2 precision machined tables keep the material perfectly in line.
7. 3,450rpm
1. Portable or desktop chamfering machine 2 in 1, BLDC servo motor.
2. Variable speed 2000~6000 RPM
3. Max. Chamfered width 0.275".
4. Adjustable bevel angle: 15°, 30 °, 45°.
5. Extra with 5 pieces R3 blades for chamfering R angle.
6. Overheating protection: Over 105 degrees Celsius it automatically shuts off.
1. 1.5 hp motor
2. 110-volt single-phase power.
3. Max. Chamfered width 0.275"
4. Adjustable bevel angle: 15°, 30 °, 45°.
5. 5-blade cutting tools provide a smooth finish
6. 2 precision machined tables keep the material perfectly in line.
7. 3,450rpm
1. Power: single-phase 220V, or three-phase220V (switchable)
2. Adopts a synchronous built-in BLDC servomotor spindle. ( 1.5Hp )
3. Adjust the speed by rotating an infinitely variable speed dial.
4. The motor is designed with a speed automatic compensation mechanism. Drill Press Machine
5. Maximum drilling capacity: 7/8" (22mm)
7. Maximum tapping capacity: 1/2" (12mm)
8. VARIABLE SPEED: 100~1800RPM
9. Swing: 18"
10. SERVO MOTOR(BLDC)
1. Portable or desktop chamfering machine 2 in 1, BLDC servo motor.
2. Variable speed 2000~6000 RPM
3. Max. Chamfered width 0.275".
4. Adjustable bevel angle: 15°, 30 °, 45°.
5. Extra with 5 pieces R3 blades for chamfering R angle.
6. Overheating protection: Over 105 degrees Celsius it automatically shuts off.
1. Power: single-phase 220V, or three-phase220V (switchable)
2. Adopts a synchronous built-in BLDC servomotor spindle. ( 1.5Hp )
3. Adjust the speed by rotating an infinitely variable speed dial.
4. The motor is designed with a speed automatic compensation mechanism. Drill Press Machine
5. Maximum drilling capacity: 7/8" (22mm)
7. Maximum tapping capacity: 1/2" (12mm)
8. VARIABLE SPEED: 100~1800RPM
9. Swing: 18"
10. SERVO MOTOR(BLDC)
MADE IN THE USA
with four barrels spaced evenly on the periphery of a turret, Deburr, and finish your products with ease!
Electronic Variable Speed Control
Separator to help productivity
Reverse Turret Drive for those even deburr and finish jobs!
MADE IN THE USA
Drag finishing technology allows the easy and simple racking of all types of parts that have specific deburring and finishing requirements. Parts can now be individually fixtured outside the chamber, and subsequently loaded in a quick and efficient manner.
MADE IN THE USA
The 1/3 cu. ft. removable barrels are sold separately, and are available in welded steel, with or without rubber liners, or in Polypro, for the ultimate in versatility.
The integrated control panel can be wired for 110/220V single phase.
MADE IN THE USA
"Quick-Release" Low-cost replaceable bowl
Features our Patented "Rubber suspension mount technology"
More load capacity than any machine its size
Direct Drive - no belts or pulleys.
MADE IN THE USA
- 1.5 cu. ft. working capacity
- Floor space required 4' x 4'
- 2 HP Motor
MADE IN THE USA
- 1.6 cu. ft. working capacity
- Floor space required 4' x 4'
- 2 HP Motor
MADE IN THE USA
- 3.8 cu. ft. working capacity
- Floor space required 4' x 4'
- 3 HP Motor
MADE IN THE USA
- 4 cu. ft. working capacity
- Floor space required 4' x 4'
- 3 HP Motor
MADE IN THE USA
The Tub Finishers (or trough vibrators) are versatile finishing machines for medium to large parts. Most processes involve allowing parts to rotate freely within the mass. Based on cubic foot capacity no other style gives you the channel width of a Tub finisher.
MADE IN THE USA
- 5 HP
- 11.8 Working Capacity
- 24 x 50 x 26 in.
Made in Taiwan
1. 1.5 hp motor
2. 110-volt single-phase power.
3. Max. Chamfered width 0.275"
4. Adjustable bevel angle: 15°, 30 °, 45°.
5. 5-blade cutting tools provide a smooth finish
6. 2 precision machined tables keep the material perfectly in line.
7. 3,450rpm
1. Portable or desktop chamfering machine 2 in 1.
2. BLDC servo motor.
3. Max. Chamfered width 0.275".
4. Adjustable bevel angle: 15°, 30 °, 45°.
5. Extra with 5 pieces R3 blades for chamfering R angle.
6. Variable speed 2000~6000 RPM
7. Overheating protection: Over 105 degrees Celsius it automatically shuts off.